PROBLEMA Spariti centinaia di gb!

greenjey

Utente Attivo
264
58
OS
Windows
Ciao a tutti, da quando ho aperto e scaricato l'allegato di una mail (molto stupidamente) ho iniziato ad avere moltissimi problemi col PC.

Partiamo dal principio; circa a novembre mi arrivò una mail, stupidamente scarica il contenuto ma mi accorsi del danno e non lo avviai.
Dopo qualche settimane dopo un riavvio del PC (lo spengo molto raramente) mi apparse una notifica chiedendo di dare i permessi ad un applicazione e io clickai no, dopo svariate volte che si ripresentata clickate si... E da li il danno!
Era un cryptolocker, morale della favola buttati via tutto con un bel hard reset.
Subito mi accorsi che erano spariti ben 220gb li cercai per un po' e poi misi l'anima in pace (visto che i santi erano finiti).
Il PC andava bene, fino a ieri.
Accendo il PC, vado a mangiare e lo trovo che si sta ancora accendendo, e mi accorgo che continuava a riavviarsi, ripresentano la scritta "inaccessible_boot_device" .
Leggo un po' in giro, guardo qualche video ma niente, non riesco a sistemare il problema, ed infine opto per reinstallare Windows.
Nell'installazione indovinate quanto spazio mi dice di hdd? 16gb.
Mangiati altri 264 GB!
Però almeno questa volta i 264gb non sembrano del tutto persi, in quanto quando avvio mi fa scegliere che OS usare.

Quindi la mia domanda è : esiste un modo per riavere i miei 500gb? O l'unico metodo e cambiare hard disk?


P. S. Il PC è un Acer Aspire V5-531

Grazie mille per l'attenzione ;)
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
6,602
2,486
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
avvia una live linux e vedi da cosa dice del disco
 
  • Mi piace
Reazioni: greenjey

Federico83

UTENTE LEGGENDARIO
Utente Èlite
35,202
6,220
CPU
Ryzen 7 3700X
Dissipatore
NDH15
Scheda Madre
Gigabyte auros X570 elite
HDD
4.5TB + 7 di NAS lol
RAM
16 GB G.Skill 3200
GPU
RTX2070
Monitor
IIyama 28" 4K
PSU
Cooler Master GX 650
Case
REV200
OS
Windows10x64pro
  • Mi piace
Reazioni: greenjey

greenjey

Utente Attivo
264
58
OS
Windows
1454488335159857234545.jpg
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
6,602
2,486
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
è la partizone di windows ed il problema sta scritto nel messaggio : linux in misura preventiva NON apre le partizioni windows se trova un file che identifica il non corretto spegnimento o ibernazione della macchina

si ovvia montandola in sola lettura con i comandi :


mkdir win
sudo mount -o ro /dev/sdb3 win

apri "file" e troverai una cartella che si chiama "win" , aprila e troverai i tuoi file .

però vorrei vedere qualcosa di più utile, nel menù applicazioni trovi il programma " dischi " o "disks" , apri quello e posta uno screenshot ( BASTA PREMERE IL TASTO " STAMP" e troverai l'immagine bella e pronta da carficare qua su toms )

eventualmente anche da terminale

sudo fdisk -l
 
  • Mi piace
Reazioni: greenjey

greenjey

Utente Attivo
264
58
OS
Windows
è la partizone di windows ed il problema sta scritto nel messaggio : linux in misura preventiva NON apre le partizioni windows se trova un file che identifica il non corretto spegnimento o ibernazione della macchina

si ovvia montandola in sola lettura con i comandi :


mkdir win
sudo mount -o ro /dev/sdb3 win

apri "file" e troverai una cartella che si chiama "win" , aprila e troverai i tuoi file .

però vorrei vedere qualcosa di più utile, nel menù applicazioni trovi il programma " dischi " o "disks" , apri quello e posta uno screenshot ( BASTA PREMERE IL TASTO " STAMP" e troverai l'immagine bella e pronta da carficare qua su toms )

eventualmente anche da terminale

sudo fdisk -l

ok, grazie mille!
Ecco qui:
Schermata.png Schermata-1.png ed ecco anche nel terminale
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
6,602
2,486
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
che cosa strana, il tuo disco è da 320 GB .. sei sicurissimo fosse da 500 ?
vediamo come fixarlo comunque !


EDIT : PRIMA DI FARE TUTTO QUESTO PUOI POSTASRMI L'UOTPUT DEL COMANDO dmesg ?

usa questi comandi per aprire la vecchia partizione windows

mkdir win
sudo mount -o ro /dev/sdb3 win

così potrai copiare i dati su hdd esterno .

sempre da linux , dopo aver finito la copia scrivi in un terminale :
sudo umount /dev/sdb3
sudo dd if=/dev/zero of=/dev/sdb bs=4069 ( questo distriggerà in modo permanente TUTTI i dati del disco fisso rendendo materialmente impossibile ogni recupero , spianerà la tabella delle partizioni riportando il disco allo stato di fabbrica )
sudo fdisk /dev/sdb , si aprirù un programma, premi la lettera O ( crea una nuova tabella partizioni) e poi N e premi invio fichè non ritorni al prompt ( crea una nuova partizione non formattata grande quanto tutto il disco ) e poi premi la lettera W
se richiesto Q serve per uscire .
quanto sei tornato alla shell scrivi
sudo mkfs.ext4 /dev/sdb1 per formattare la partizione con ext4 , così il tuo volume dovrebbe tornare a 500 GB.
 
  • Mi piace
Reazioni: greenjey

greenjey

Utente Attivo
264
58
OS
Windows
ok, grazie mille!
ecco cosa è uscito da quel comando:
[ 0.281843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.282071] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.284185] Switched to clocksource hpet
[ 0.297438] AppArmor: AppArmor Filesystem Enabled
[ 0.297540] pnp: PnP ACPI init
[ 0.297607] ACPI: bus type PNP registered
[ 0.297846] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.297896] system 00:00: [io 0xffff] has been reserved
[ 0.297945] system 00:00: [io 0xffff] has been reserved
[ 0.297994] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.298044] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.298093] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.298145] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[ 0.298198] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298263] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.298362] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.298413] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.298543] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.298602] pnp 00:04: Plug and Play ACPI device, IDs SYN1b5e SYN1b00 SYN0002 PNP0f13 (active)
[ 0.298797] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:03:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[ 0.298922] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.298973] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.299024] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.299075] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.299127] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.299178] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.299229] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.299279] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.299331] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.299383] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.299436] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299891] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.299942] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.299994] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.300031] pnp: PnP ACPI: found 7 devices
[ 0.300075] ACPI: bus type PNP unregistered
[ 0.300126] PnPBIOS: Disabled by ACPI PNP
[ 0.338434] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.338553] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.338620] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.338669] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.338724] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.338780] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.338860] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0580000-0xf058ffff pref]
[ 0.338927] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.338980] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.339044] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.339047] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.339051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.339054] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.339058] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.339061] pci_bus 0000:02: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.339064] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.339068] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.339117] NET: Registered protocol family 2
[ 0.339457] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.339526] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.339597] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.339664] TCP: reno registered
[ 0.339708] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.339762] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.339887] NET: Registered protocol family 1
[ 0.339958] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.340859] PCI: CLS 64 bytes, default 64
[ 0.340934] Trying to unpack rootfs image as initramfs...
[ 7.879265] Freeing initrd memory: 19860K (dec9a000 - dffff000)
[ 7.879770] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 7.879922] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 7.879979] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 7.880116] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.880230] Scanning for low memory corruption every 60 seconds
[ 7.881006] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 7.881096] Initialise system trusted keyring
[ 7.881196] audit: initializing netlink subsys (disabled)
[ 7.881878] audit: type=2000 audit(1454494151.864:1): initialized
[ 7.882462] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 7.885993] zpool: loaded
[ 7.886037] zbud: loaded
[ 7.886230] VFS: Disk quotas dquot_6.5.2
[ 7.886355] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.887306] fuse init (API version 7.23)
[ 7.887531] msgmni has been set to 1679
[ 7.887692] Key type big_key registered
[ 7.888328] Key type asymmetric registered
[ 7.888376] Asymmetric key parser 'x509' registered
[ 7.888454] bounce: pool size: 64 pages
[ 7.888513] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 7.888653] io scheduler noop registered
[ 7.888703] io scheduler deadline registered (default)
[ 7.888856] io scheduler cfq registered
[ 7.889838] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.889915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 7.890083] intel_idle: MWAIT substates: 0x21120
[ 7.890086] intel_idle: v0.4 model 0x2A
[ 7.890089] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 7.890445] ACPI: AC Adapter [ADP1] (off-line)
[ 7.890704] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 7.890806] ACPI: Lid Switch [LID0]
[ 7.890929] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 7.891000] ACPI: Sleep Button [SLPB]
[ 7.891121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.891189] ACPI: Power Button [PWRF]
[ 7.892428] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.892479] ACPI: Thermal Zone [TZS0] (40 C)
[ 7.892868] thermal LNXTHERM:01: registered as thermal_zone1
[ 7.892916] ACPI: Thermal Zone [TZS1] (27 C)
[ 7.893025] GHES: HEST is not enabled!
[ 7.893273] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 7.894156] ACPI: Battery Slot [BAT0] (battery present)
[ 7.894283] isapnp: Scanning for PnP cards...
[ 7.896221] Linux agpgart interface v0.103
[ 7.898840] brd: module loaded
[ 7.900101] loop: module loaded
[ 7.900531] libphy: Fixed MDIO Bus: probed
[ 7.900579] tun: Universal TUN/TAP device driver, 1.6
[ 7.900625] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 7.900738] PPP generic driver version 2.4.2
[ 7.900845] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.900900] ehci-pci: EHCI PCI platform driver
[ 7.901133] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 7.901202] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 7.901286] ehci-pci 0000:00:1a.0: debug port 2
[ 7.905244] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 7.905271] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf071a000
[ 7.917224] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 7.917345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.917397] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.917463] usb usb1: Product: EHCI Host Controller
[ 7.917510] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[ 7.917560] usb usb1: SerialNumber: 0000:00:1a.0
[ 7.917809] hub 1-0:1.0: USB hub found
[ 7.917864] hub 1-0:1.0: 2 ports detected
[ 7.918256] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 7.918309] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.918391] ehci-pci 0000:00:1d.0: debug port 2
[ 7.922344] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 7.922365] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0719000
[ 7.933252] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 7.933383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.933435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.933503] usb usb2: Product: EHCI Host Controller
[ 7.933549] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[ 7.933598] usb usb2: SerialNumber: 0000:00:1d.0
[ 7.933862] hub 2-0:1.0: USB hub found
[ 7.933914] hub 2-0:1.0: 2 ports detected
[ 7.934170] ehci-platform: EHCI generic platform driver
[ 7.934235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.934290] ohci-pci: OHCI PCI platform driver
[ 7.934354] ohci-platform: OHCI generic platform driver
[ 7.934416] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.934683] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.934738] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 7.934918] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 7.934951] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[ 7.935054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.935106] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.935172] usb usb3: Product: xHCI Host Controller
[ 7.935219] usb usb3: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
[ 7.935269] usb usb3: SerialNumber: 0000:00:14.0
[ 7.935509] hub 3-0:1.0: USB hub found
[ 7.935564] hub 3-0:1.0: 4 ports detected
[ 7.936283] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.936334] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 7.936457] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.936510] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.936576] usb usb4: Product: xHCI Host Controller
[ 7.936623] usb usb4: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
[ 7.936672] usb usb4: SerialNumber: 0000:00:14.0
[ 7.936904] hub 4-0:1.0: USB hub found
[ 7.936959] hub 4-0:1.0: 4 ports detected
[ 7.937795] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 7.941055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.941107] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.941366] mousedev: PS/2 mouse device common for all mice
[ 7.941667] rtc_cmos 00:01: RTC can wake from S4
[ 7.941880] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 7.941962] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 7.942115] device-mapper: uevent: version 1.0.3
[ 7.942277] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 7.942384] platform eisa.0: Probing EISA bus 0
[ 7.942430] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 7.942481] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 7.942531] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 7.942580] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 7.942630] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 7.942680] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 7.942729] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 7.942782] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 7.942834] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 7.942887] platform eisa.0: EISA: Detected 0 cards
[ 7.942972] cpufreq-nforce2: No nForce2 chipset.
[ 7.943027] Intel P-state driver initializing.
[ 7.943089] Intel pstate controlling: cpu 0
[ 7.943172] Intel pstate controlling: cpu 1
[ 7.943269] Consider also installing thermald for improved thermal control.
[ 7.943333] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.943570] TCP: cubic registered
[ 7.943855] NET: Registered protocol family 10
[ 7.944246] NET: Registered protocol family 17
[ 7.944320] Key type dns_resolver registered
[ 7.944782] Using IPI No-Shortcut mode
[ 7.944982] Loading compiled-in X.509 certificates
[ 7.951188] Loaded X.509 cert 'Magrathea: Glacier signing key: 4fe12264ad04b41c64ed4480a8934267c4c1f1b8'
[ 7.951283] registered taskstats version 1
[ 7.954480] Key type trusted registered
[ 7.960024] Key type encrypted registered
[ 7.960080] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.960132] ima: No TPM chip found, activating TPM-bypass!
[ 7.960210] evm: HMAC attrs: 0x1
[ 7.960846] Magic number: 4:873:172
[ 7.960930] acpi device:35: hash matches
[ 7.961031] rtc_cmos 00:01: setting system clock to 2016-02-03 10:09:12 UTC (1454494152)
[ 7.961204] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.961273] EDD information not available.
[ 7.961503] PM: Hibernation image not present or could not be loaded.
[ 7.966442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 8.233457] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 8.248890] isapnp: No Plug & Play device found
[ 8.249317] Freeing unused kernel memory: 892K (c1a10000 - c1aef000)
[ 8.249482] Write protecting the kernel text: 6752k
[ 8.249716] Write protecting the kernel read-only data: 2900k
[ 8.249763] NX-protecting the kernel data: 5536k
[ 8.273198] systemd-udevd[100]: starting version 204
[ 8.329100] [drm] Initialized drm 1.1.0 20060810
[ 8.339448] wmi: Mapper loaded
[ 8.400342] rtsx_pci 0000:02:00.0: irq 41 for MSI/MSI-X
[ 8.400365] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[ 8.404501] [drm] Memory usable by graphics device = 2048M
[ 8.404555] [drm] Replacing VGA console driver
[ 8.405129] Console: switching to colour dummy device 80x25
[ 8.406314] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 8.406323] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.406625] hub 1-1:1.0: USB hub found
[ 8.406684] hub 1-1:1.0: 4 ports detected
[ 8.408951] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.408966] r8169 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 8.409245] r8169 0000:02:00.2: irq 42 for MSI/MSI-X
[ 8.409874] r8169 0000:02:00.2 eth0: RTL8411 at 0xf801a000, 20:6a:8a:8b:4a:22, XID 08800800 IRQ 42
[ 8.409885] r8169 0000:02:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.429621] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 8.429639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.429647] [drm] Driver supports precise vblank timestamp query.
[ 8.429764] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.469583] [drm] failed to retrieve link info, disabling eDP
[ 8.481927] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 8.481937] [drm] This can cause pipe underruns and display issues.
[ 8.481942] [drm] Please upgrade your BIOS to fix this.
[ 8.499680] fbcon: inteldrmfb (fb0) is primary device
[ 8.517723] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 8.650473] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 8.650476] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.650981] hub 2-1:1.0: USB hub found
[ 8.651140] hub 2-1:1.0: 4 ports detected
[ 8.817933] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 8.877914] tsc: Refined TSC clocksource calibration: 1297.055 MHz
[ 9.007700] usb 3-2: New USB device found, idVendor=04fc, idProduct=0538
[ 9.007704] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.007706] usb 3-2: Product: Trust Mouse 16536
[ 9.007708] usb 3-2: Manufacturer: MLK
[ 9.007990] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 9.023708] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.038336] usbcore: registered new interface driver usbhid
[ 9.038338] usbhid: USB HID core driver
[ 9.045929] input: MLK Trust Mouse 16536 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04FC:0538.0001/input/input6
[ 9.046203] hid-generic 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse 16536] on usb-0000:00:14.0-2/input0
[ 9.082203] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 9.116516] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4656]
[ 9.144868] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1198..]
[ 9.182110] usb 1-1.2: New USB device found, idVendor=13fe, idProduct=4123
[ 9.182113] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.182115] usb 1-1.2: Product: USB DISK Pro
[ 9.182117] usb 1-1.2: Manufacturer:
[ 9.182119] usb 1-1.2: SerialNumber: 070B33C9A9A99A55
[ 9.195176] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 9.195297] scsi0 : usb-storage 1-1.2:1.0
[ 9.195450] usbcore: registered new interface driver usb-storage
[ 9.203234] usbcore: registered new interface driver uas
[ 9.214917] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2134, fw id: 1100738
[ 9.250304] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 9.254339] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 9.348811] usb 1-1.4: string descriptor 0 read error: -22
[ 9.348821] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e04e
[ 9.348833] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.370829] Console: switching to colour frame buffer device 170x48
[ 9.415159] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.417749] i915 0000:00:02.0: registered panic notifier
[ 9.420371] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 9.491914] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.494693] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 9.497524] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.500225] ahci 0000:00:1f.2: version 3.0
[ 9.500471] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 9.514399] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[ 9.517059] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 9.527435] scsi1 : ahci
[ 9.530277] scsi2 : ahci
[ 9.533121] scsi3 : ahci
[ 9.536063] scsi4 : ahci
[ 9.538854] scsi5 : ahci
[ 9.541447] ata1: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718100 irq 44
[ 9.543986] ata2: DUMMY
[ 9.546487] ata3: DUMMY
[ 9.548965] ata4: DUMMY
[ 9.551406] ata5: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718300 irq 44
[ 9.625265] usb 2-1.4: New USB device found, idVendor=064e, idProduct=e330
[ 9.627809] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 9.630333] usb 2-1.4: Product: HD WebCam
[ 9.632816] usb 2-1.4: Manufacturer: SuYin
[ 9.818914] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9.870561] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.874543] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.878937] Switched to clocksource tsc
[ 9.881418] ata5.00: ATAPI: HL-DT-ST DVDRAM GU61N, 1.00, max UDMA/133
[ 9.891799] ata5.00: configured for UDMA/133
[ 10.196881] scsi 0:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 4
[ 10.200133] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.201744] sd 0:0:0:0: [sda] 30511104 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 10.203913] sd 0:0:0:0: [sda] Write Protect is off
[ 10.203917] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 10.206112] sd 0:0:0:0: [sda] No Caching mode page found
[ 10.206113] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 10.211396] ata1.00: ATA-8: ST320LT020-9YG142, 0010SDM1, max UDMA/133
[ 10.211399] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 10.213941] ata1.00: configured for UDMA/133
[ 10.213957] scsi: waiting for bus probes to complete ...
[ 10.219778] sda: sda1
[ 10.223379] scsi 1:0:0:0: Direct-Access ATA ST320LT020-9YG14 SDM1 PQ: 0 ANSI: 5
[ 10.226076] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.228538] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 10.228763] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 10.231241] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GU61N 1.00 PQ: 0 ANSI: 5
[ 10.235276] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 10.237580] sd 1:0:0:0: [sdb] Write Protect is off
[ 10.239825] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.239851] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.264200] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.266491] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.269066] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 10.269170] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 10.285721] sdb: sdb1 sdb2 sdb3
[ 10.288860] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 11.165022] random: nonblocking pool is initialized
[ 13.986425] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 26.919630] systemd-udevd[861]: starting version 204
[ 27.258679] lp: driver loaded but no devices found
[ 27.301313] ppdev: user-space parallel port driver
[ 27.420663] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.466291] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
[ 27.466303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.466309] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 27.466315] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.466317] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 27.466323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.466325] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 27.466330] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.466333] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 27.529592] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 27.813768] Bluetooth: Core ver 2.19
[ 27.813792] NET: Registered protocol family 31
[ 27.813795] Bluetooth: HCI device and connection manager initialized
[ 27.813803] Bluetooth: HCI socket layer initialized
[ 27.813807] Bluetooth: L2CAP socket layer initialized
[ 27.813820] Bluetooth: SCO socket layer initialized
[ 27.971043] Bluetooth: RFCOMM TTY layer initialized
[ 27.971057] Bluetooth: RFCOMM socket layer initialized
[ 27.971068] Bluetooth: RFCOMM ver 1.11
[ 28.117654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.117660] Bluetooth: BNEP filters: protocol multicast
[ 28.117668] Bluetooth: BNEP socket layer initialized
[ 28.164958] init: cups main process (969) killed by HUP signal
[ 28.164978] init: cups main process ended, respawning
[ 28.208143] usbcore: registered new interface driver btusb
[ 28.287612] cfg80211: Calling CRDA to update world regulatory domain
[ 28.342337] usbcore: registered new interface driver ath3k
[ 28.402048] usb 1-1.4: USB disconnect, device number 4
[ 28.438751] media: Linux media interface: v0.10
[ 28.449470] device-mapper: multipath: version 1.7.0 loaded
[ 28.541436] Linux video capture interface: v2.00
[ 28.610933] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 28.649820] intel_rapl: Found RAPL domain package
[ 28.649828] intel_rapl: Found RAPL domain core
[ 28.649832] intel_rapl: Found RAPL domain uncore
[ 28.706364] usb 1-1.4: string descriptor 0 read error: -22
[ 28.706373] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e04e
[ 28.706377] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 28.730890] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 28.777340] uvcvideo: Found UVC 1.00 device HD WebCam (064e:e330)
[ 28.797370] input: HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8
[ 28.799588] usbcore: registered new interface driver uvcvideo
[ 28.799593] USB Video Class driver (1.1.1)
[ 28.829224] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 28.829231] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 28.829235] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 28.829238] sound hdaudioC0D0: mono: mono_out=0x0
[ 28.829240] sound hdaudioC0D0: inputs:
[ 28.829244] sound hdaudioC0D0: Mic=0x1b
[ 28.874465] ath: phy0: ASPM enabled: 0x43
[ 28.874473] ath: EEPROM regdomain: 0x6c
[ 28.874475] ath: EEPROM indicates we should expect a direct regpair map
[ 28.874478] ath: Country alpha2 being used: 00
[ 28.874480] ath: Regpair used: 0x6c
[ 28.893435] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 28.893575] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 29.000614] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 29.002451] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xf8f00000, irq=19
[ 29.198027] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 29.198060] acer_wmi: Function bitmap for Communication Button: 0x801
[ 29.219439] init: failsafe main process (1123) killed by TERM signal
[ 29.254283] acer_wmi: Brightness must be controlled by acpi video driver
[ 29.254648] input: Acer WMI hotkeys as /devices/virtual/input/input11
[ 29.255410] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[ 29.424287] cfg80211: World regulatory domain updated:
[ 29.424294] cfg80211: DFS Master region: unset
[ 29.424297] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 29.424302] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 29.424305] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 29.424308] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 29.424311] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 29.424314] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.694826] init: alsa-restore main process (1438) terminated with status 99
[ 31.412451] r8169 0000:02:00.2 eth0: link down
[ 31.412523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.435682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.279759] init: samba-ad-dc main process (1573) terminated with status 1
[ 32.481938] init: plymouth-upstart-bridge main process ended, respawning
[ 32.492851] init: plymouth-upstart-bridge main process (1848) terminated with status 1
[ 32.492872] init: plymouth-upstart-bridge main process ended, respawning
[ 33.768608] init: plymouth-stop pre-start process (2187) terminated with status 1
[ 5430.332183] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9475.162023] r8169 0000:02:00.2 eth0: link up
[ 9475.162047] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[10927.860093] JFS: nTxBlock = 8192, nTxLock = 65536
[10928.010027] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
6,602
2,486
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
ok, il tuo è uno dei casi più strani di dischi stranito, backup e spianalo come indicato nel mio post precedente

potrebbe volerci un pò , un bel pò a spianarlo tutto, conta che andrà sui 100MB al secondo
 
  • Mi piace
Reazioni: greenjey

centoventicinque

Moderatore
Staff Forum
Utente Èlite
6,602
2,486
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
si, sta lavorando :)

ci metterà qualche ora
 
  • Mi piace
Reazioni: greenjey

Entra

oppure Accedi utilizzando