[Risolto] Il Linux maledetto e l'hp pavillion zv 6000 inespugnabile

airex · 26 Dicembre 2006

il firmware è una cosa "delicata", se non è perfetto non andrà nulla ... mi sa che un filo di manuale te lo devi leggere (ti devi far venire la voglia, in linux vige la regola RTFM: leggi quel dannato manuale :asd:)

ti tocca usare carta e penna per prendere nota delle cose se non vuoi leggere i manuali ...

diabo84 · 26 Dicembre 2006

Io mi aggiungo: ho installato la ubuntu, e mi ritrovo con la scheda rilevata wifi da pannello (sconosciuta, devo capire come e quali driver installare :D) ma con un'altra parte di menu che mi permette la configurazione di tutti i parametri, in stile win :chupachup
La versione è la 6.10 edgy, e in effetti è parecchio migliorata confronto alla vecchia 6.0 :) Ho scaricato anche io madwifi, ver 0.9-2-1 tar, xò credo sia sorgente :boh: se riesco a combinare qlc posso postare i miei passaggi :ok: magari possono esserti d'aiuto :)

isabellakiss80 · 26 Dicembre 2006

uffa....~ questo simbolo da linux non riesco a scriverloooooooooooooooooooooooooooooooooooo

hey dove hai trovato il madwifi? ripasso a linux^^

airex · 26 Dicembre 2006

~ corrisponde alla home directory dell'utente in uso, se stai lavorando ad esempio con l'utente pippo a ~ puoi sostituire /home/pippo.

Cmq eccoti qualche combinazione utile:
ALTGR-ì => ~
ALTGR-' => `

AMD64 · 26 Dicembre 2006

diabo84 ha detto:
Io mi aggiungo: ho installato la ubuntu, e mi ritrovo con la scheda rilevata wifi da pannello (sconosciuta, devo capire come e quali driver installare :D) ma con un'altra parte di menu che mi permette la configurazione di tutti i parametri, in stile win :chupachup
La versione è la 6.10 edgy, e in effetti è parecchio migliorata confronto alla vecchia 6.0 :) Ho scaricato anche io madwifi, ver 0.9-2-1 tar, xò credo sia sorgente :boh: se riesco a combinare qlc posso postare i miei passaggi :ok: magari possono esserti d'aiuto :)

Ciao Diabo, ti conviene farti un thread a parte che questo già è lunghissimo e ci si capisce poco così. :)
Copia e incolla il tuo post in un nuovo topic così fai subito.
Ora scarico anch'io quei driver e provo a installarli così se ci riesco ti dico come ho fatto.

Intanto mi diresti che scheda wi-fi hai? thanks ;)

diabo84 · 26 Dicembre 2006

AMD64 ha detto:
Ciao Diabo, ti conviene farti un thread a parte che questo già è lunghissimo e ci si capisce poco così. :)
Copia e incolla il tuo post in un nuovo topic così fai subito.
Ora scarico anch'io quei driver e provo a installarli così se ci riesco ti dico come ho fatto.

Intanto mi diresti che scheda wi-fi hai? thanks ;)

Okappa!

Intanto mi sbatto prossimamente sul nuovo 3d, poi se ho news vi farò sapere :ok:

In bocca al lupo! :)

"andrea" · 26 Dicembre 2006

ok allora se hai athlon 64 hai installato il firmware giusto, quando lo hai installato che risposte hai avuto? sarebbe stato utile visualizzare il log
facendo un copia incolla dalla shell, inoltre se hai installato xp col filsystem
nfts ti sarebbe servito fare anche una piccola partizione magari da 1 giga
in fat 32 così da usarla per lo scambio, infatti linux può solo leggere da ntfs ma non scrivere, invece dal fat32 legge e scrive quindi quando stai su linux e vuoi portare qualcosa su windows lo copi nella partizione di scambio formattata in fat32 e poi te la ritrovi anche quando usi windows, con l'utility ndiswrapper usando i driver nativi di xp hai provato?
o un sistema o l'altro deve andare per forza, non mollare, ciao

isabellakiss80 · 26 Dicembre 2006

allora il firmware ci sta sono sicura

ecco qui i comandi (stavolta lo scanner ha funzionato a dovere=))

ho estratto il firmware dal driver di windoz....pero come diavolo si installa o meglio è gia installato? perche la scheda una volta eliminata da yast mi dice che la scheda bcm 4306 ha bisogno del firmware per funzionare a dovere....idee? un altra cosa in suse knetwork menager risulta non caricato...mah cioè non posso vedere un caiser....comunque la schedina nelle condizioni attuali dando
iwconfig mi da la stessa pappardella

(none) :/tmp # bcm43xx-fwcutter -w /lib/firmware BCMWL564.SYS
filename : bcmw1564.sys
version : 3.70.17.5
MD5 : f5590c8784b91dfdgee092d3040b6e40
microcodes: 245
pcms : 4 5
microcode : 2
revision : OxOl18
patchlevel: OxOO17
date: 2004-05-06
time : 21:34:00
microcode : 4
revision : OxOl18
patchlevel: OxOO17
date: 2004-05-06
time : 21:34:00
microcode : 5
revision : OxOl18
patchlevel: OxOO17
date: 2004-95-06
time : 21:34:00
extracting bcm43xx_microcode2.fw ...
extracting bcm43xx_microcode4.fw ...
extracting bcm43xx_microcode5.fw ...
extracting bcm43xx-pcm4.fw ...
extracting bcm43xx-pcm5.fw ...
extracting bcm43xx_initval01.fw ...
extracting bcm43xx_initval02.fw ...
extracting bcm43xx_initval03.fw ...
extracting bcm43xx_initval04.fw ...
extracting bcm43xx_initval05.fw ...
extracting bcm43xx_initval06.fw ...
extracting bcm43xx_initval07.fw ...
extracting bcm43xx_initval08.fw ...
extracting bcm43xx_initval09.fw ...
extracting bcm43xx_initval10.fw ...

per andrea ....e dove si troverebbe sto log^^ ignoranza allo stato puro presente^^ripasso a linux^^

"andrea" · 26 Dicembre 2006

IL log è il risultato che hai avuto nella shell quando hai fatto il make e il make install del firmware madwifi, si fa una copia e lo incolli su un'editor di testo come kate poi magari ce lo vai vedere,
puoi provare con l'utility ndiswrapper-1.28-jen0.x86_64
lo installi con yast perchè è un rpm poi per vedere se funziona digita da root ndiswrapper
ti apparirà la lista dei comandi
adesso prendi i driver di xp ti serve il file bcmwl564.inf prendi anche il file sys e il cat mettili in una cartella e chiamala driver e mettila in home
apri una shell
da root loggati poi digita
ndiswrapper -i home/driver/bcmwl564.inf____invio
ndiswrapper -l_____________invio per verificare se sono stati caricati
ndiswrapper -m________invio per caricare il modulo nel kernel

successivamente vai in yast-schede di rete-altro non configurato e clicca su aggiungi-nuova scheda di rete-wireless-chiamala ndiswrapper-dhcp automatico e il resto come hai fatto finora, salva la configurazione e riprova

isabellakiss80 · 26 Dicembre 2006

allora c' è qualcosa di strano perche la mia scheda di rete viene visualizzata come eth0 e non come wlan0? l ho configurata svariate volte utilizzando yast pero' pur mettendo wireless dando iwconfig mi da sempre eth0 per la bcm 4306 perche?

airex · 26 Dicembre 2006

eth0, wlan0, ... non sono problemi, tu adeguati solo al come il kernel la vede (anche nel mio caso la scheda wifi è wth0 mentre la scheda ethernet normale è eth1)

direi proprio che il firmware ora c'è di sicuro

i log li trovi anche sotto forma di file in /var/log/

isabellakiss80 · 27 Dicembre 2006

Ho reinstallato suse10.2 64 bit
sono andata su yast su schede di rete
ho visto che vedeva la scheda di rete come ethernet(nome scheda hp presario r3000 b/g che dovrebbe essere lastessa cosa....)
allora ho fatto elimina
l ho riconfigurata
wireless
modo di attivazione all avvio
modo operativo : gestito
nome essid . rete palazzo
modo di autenticazione aperto
chiave input . esadecimale
bit rate auto
poi ho provato bitrate 11

ma non mi si connetteva.

ho provato con ndiswrapper:
inux-if3j:~/Desktop # ndiswrapper -i netbc564.inf
installing netbc564 ...
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
forcing parameter IBSSGMode from 0 to 2
linux-if3j:~/Desktop # ndiswrapper -l
installed drivers:
netbc564 driver installed, hardware (14E4:4325) present (alternate driver: bcm43xx)

ho messo il nome issd della rete
ho messo la velocita a 11kb
mo messo wireless
ho ottenuto da iwconfig:

inux-if3j:~ # iwconfig
lo no wireless extensions.

eth1 no wireless extensions.

eth0 IEEE 802.11b/g ESSID:off/any Nickname:"Broadcom 4306"
Mode:Managed Access Point: Invalid
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

sit0 no wireless extensions.

provo allora con il firmware datomi da andrea
metto dentro una cartella qualsiasi premo f4 mi si apre console
scrivo

make clean
make
Checking requirements... ok.
Checking kernel configuration... ok.
make -C /lib/modules/2.6.18.2-34-default/build SUBDIRS=/home/user/madwifi-ng-r1821-20061124 modules
make[1]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/x86_64/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/x86_64/default modules
CC [M] /home/user/madwifi-ng-r1821-20061124/ath/if_ath.o
CC [M] /home/user/madwifi-ng-r1821-20061124/ath/if_ath_pci.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath/ath_pci.o
CC [M] /home/user/madwifi-ng-r1821-20061124/ath_hal/ah_os.o
HOSTCC /home/user/madwifi-ng-r1821-20061124/ath_hal/uudecode
UUDECODE /home/user/madwifi-ng-r1821-20061124/ath_hal/x86_64-elf.hal.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath_hal/ath_hal.o
CC [M] /home/user/madwifi-ng-r1821-20061124/ath_rate/sample/sample.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath_rate/sample/ath_rate_sample.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/if_media.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_beacon.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_crypto.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_crypto_none.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_input.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_node.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_output.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_power.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_proto.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_scan.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_wireless.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_linux.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_monitor.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_acl.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_crypto_ccmp.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_scan_ap.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_scan_sta.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_crypto_tkip.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_crypto_wep.o
CC [M] /home/user/madwifi-ng-r1821-20061124/net80211/ieee80211_xauth.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_wep.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_tkip.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_ccmp.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_acl.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_xauth.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_sta.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_ap.o
Building modules, stage 2.
MODPOST
CC /home/user/madwifi-ng-r1821-20061124/ath/ath_pci.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath/ath_pci.ko
CC /home/user/madwifi-ng-r1821-20061124/ath_hal/ath_hal.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath_hal/ath_hal.ko
CC /home/user/madwifi-ng-r1821-20061124/ath_rate/sample/ath_rate_sample.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/ath_rate/sample/ath_rate_sample.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_acl.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_acl.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_ccmp.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_ccmp.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_ap.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_ap.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_sta.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_scan_sta.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_tkip.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_tkip.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_wep.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_wep.ko
CC /home/user/madwifi-ng-r1821-20061124/net80211/wlan_xauth.mod.o
LD [M] /home/user/madwifi-ng-r1821-20061124/net80211/wlan_xauth.ko
make[1]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/x86_64/default'
make -C ./tools all || exit 1
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/tools'
gcc -o athstats -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. -I../ath athstats.c
gcc -o 80211stats -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. 80211stats.c
gcc -o athkey -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athkey.c
gcc -o athchans -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athchans.c
gcc -o athctrl -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athctrl.c
gcc -o athdebug -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athdebug.c
gcc -o 80211debug -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. 80211debug.c
gcc -o wlanconfig -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. wlanconfig.c
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/tools'

make install
linux-if3j:/home/user/madwifi-ng-r1821-20061124 # make install
sh scripts/find-madwifi-modules.sh 2.6.18.2-34-default
for i in ./ath ./ath_hal ath_rate/sample ./net80211; do \
make -C $i install || exit 1; \
done
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/ath'
test -d //lib/modules/2.6.18.2-34-default/net || mkdir -p //lib/modules/2.6.18.2-34-default/net
cp ath_pci.ko //lib/modules/2.6.18.2-34-default/net
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/ath'
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/ath_hal'
test -d //lib/modules/2.6.18.2-34-default/net || mkdir -p //lib/modules/2.6.18.2-34-default/net
cp ath_hal.ko //lib/modules/2.6.18.2-34-default/net
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/ath_hal'
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/ath_rate/sample'
test -d //lib/modules/2.6.18.2-34-default/net || mkdir -p //lib/modules/2.6.18.2-34-default/net
cp ath_rate_sample.ko //lib/modules/2.6.18.2-34-default/net
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/ath_rate/sample'
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/net80211'
test -d //lib/modules/2.6.18.2-34-default/net || mkdir -p //lib/modules/2.6.18.2-34-default/net
for i in wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o wlan_xauth.o wlan_scan_sta.o wlan_scan_ap.o; do \
f=`basename $i .o`; \
cp $f.ko //lib/modules/2.6.18.2-34-default/net; \
done
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/net80211'
(export KMODPATH=/lib/modules/2.6.18.2-34-default/net; /sbin/depmod -ae)
make -C ./tools install || exit 1
make[1]: Entering directory `/home/user/madwifi-ng-r1821-20061124/tools'
install -d /usr/local/bin
for i in athstats 80211stats athkey athchans athctrl athdebug 80211debug wlanconfig; do \
install $i /usr/local/bin/$i; \
strip /usr/local/bin/$i; \
done
install -d /usr/local/man/man8
install -m 0644 man/*.8 /usr/local/man/man8
make[1]: Leaving directory `/home/user/madwifi-ng-r1821-20061124/tools'
linux-if3j:/home/user/madwifi-ng-r1821-20061124 #

isabellakiss80 · 27 Dicembre 2006

guardo il log
messagge

Dec 27 16:53:51 linux-if3j logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Dec 27 16:53:51 linux-if3j SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Dec 27 16:53:51 linux-if3j SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Dec 27 16:53:51 linux-if3j SuSEfirewall2: Warning: no interface active
Dec 27 16:53:52 linux-if3j SuSEfirewall2: batch committing...
Dec 27 16:53:53 linux-if3j SuSEfirewall2: Firewall rules successfully set
Dec 27 16:53:57 linux-if3j zmd: Daemon (WARN): Not starting remote web server
Dec 27 16:53:58 linux-if3j kernel: eth1: link down
Dec 27 16:53:58 linux-if3j kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Dec 27 16:53:58 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:53:58 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:53:58 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:53:58 linux-if3j firmware.sh[3615]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:54:01 linux-if3j auditd[2971]: Audit daemon has no space left on logging partition
Dec 27 16:54:01 linux-if3j auditd[2971]: Audit daemon has no space left on logging partition
Dec 27 16:54:01 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:54:01 linux-if3j firmware.sh[3679]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:54:01 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:54:01 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:54:01 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 16:54:01 linux-if3j kernel: SoftMAC: Associate: failed to initiate scan. Is device up?
Dec 27 16:54:01 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 16:54:01 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 16:54:01 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 16:54:03 linux-if3j kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Dec 27 16:54:03 linux-if3j kernel: sda: Current: sense key: Medium Error
Dec 27 16:54:03 linux-if3j kernel: Additional sense: Read error - loss of streaming
Dec 27 16:54:03 linux-if3j kernel: end_request: I/O error, dev sda, sector 248312
Dec 27 16:54:03 linux-if3j kernel: Buffer I/O error on device sda, logical block 31039
Dec 27 16:54:18 linux-if3j kernel: psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Dec 27 16:54:21 linux-if3j kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Dec 27 16:54:21 linux-if3j kernel: sda: Current: sense key: Medium Error
Dec 27 16:54:21 linux-if3j kernel: Additional sense: Read error - loss of streaming
Dec 27 16:54:21 linux-if3j kernel: end_request: I/O error, dev sda, sector 248312
Dec 27 16:54:21 linux-if3j kernel: Buffer I/O error on device sda, logical block 31039
Dec 27 16:54:21 linux-if3j kernel: psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched.
Dec 27 16:54:24 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:54:24 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:54:24 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:54:24 linux-if3j firmware.sh[3714]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:54:46 linux-if3j kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Dec 27 16:54:46 linux-if3j kernel: ISO 9660 Extensions: RRIP_1991A
Dec 27 16:54:46 linux-if3j hald: mounted /dev/hdc on behalf of uid 0
Dec 27 16:54:49 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:54:49 linux-if3j firmware.sh[3877]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:54:49 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:54:49 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:54:52 linux-if3j kernel: SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate()
Dec 27 16:55:14 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:55:14 linux-if3j firmware.sh[3955]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:55:14 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:55:14 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:55:37 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:55:37 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:55:37 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:55:37 linux-if3j firmware.sh[3959]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:56:01 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:56:01 linux-if3j firmware.sh[3964]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:56:01 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:56:01 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:56:01 linux-if3j auditd[2971]: Audit daemon has no space left on logging partition
Dec 27 16:56:14 linux-if3j kernel: SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate()
Dec 27 16:56:14 linux-if3j auditd[2971]: Audit daemon has no space left on logging partition
Dec 27 16:56:51 linux-if3j kernel: Loading iSCSI transport class v2.0-711.
Dec 27 16:56:51 linux-if3j kernel: iscsi: registered transport (tcp)
Dec 27 16:56:51 linux-if3j kernel: iscsi: registered transport (iser)
Dec 27 16:56:51 linux-if3j iscsid: iSCSI logger with pid=4080 started!
Dec 27 16:56:52 linux-if3j iscsid: transport class version 2.0-711. iscsid version 2.0-711
Dec 27 16:56:52 linux-if3j iscsid: iSCSI daemon with pid=4081 started!
Dec 27 16:56:52 linux-if3j iscsid: an InitiatorAlias= is required, but was not found in /etc/iscsi/initiatorname.iscsi
Dec 27 16:56:52 linux-if3j iscsid: iSCSI sync pid=4084 started
Dec 27 16:57:20 linux-if3j su: (to nobody) root on none
Dec 27 16:57:45 linux-if3j kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
Dec 27 16:58:04 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 16:58:04 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 16:58:04 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 16:58:04 linux-if3j firmware.sh[4406]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 16:58:10 linux-if3j kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Dec 27 16:58:10 linux-if3j kernel: sda: Current: sense key: Medium Error
Dec 27 16:58:10 linux-if3j kernel: Additional sense: Read error - loss of streaming
Dec 27 16:58:10 linux-if3j kernel: end_request: I/O error, dev sda, sector 248319
Dec 27 17:00:07 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:00:07 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:00:07 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:00:07 linux-if3j firmware.sh[4481]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:02:10 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:02:10 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:02:10 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:02:10 linux-if3j firmware.sh[4575]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:03:28 linux-if3j kernel: Losing some ticks... checking if CPU frequency changed.
Dec 27 17:04:13 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:04:13 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:04:13 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:04:13 linux-if3j firmware.sh[4776]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:06:17 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:06:17 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:06:17 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:06:17 linux-if3j firmware.sh[5444]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:08:22 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:08:22 linux-if3j firmware.sh[5459]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:08:22 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:08:22 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:10:27 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:10:27 linux-if3j firmware.sh[5467]: Cannot find firmware file 'bcm43xx_microcode5.fw'
Dec 27 17:10:27 linux-if3j kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
Dec 27 17:10:27 linux-if3j kernel: bcm43xx: core_up for active 802.11 core failed (-2)
Dec 27 17:10:27 linux-if3j auditd[2971]: Audit daemon has no space left on logging partition

isabellakiss80 · 27 Dicembre 2006

provo a dare iwconfig e iwlist eth0 scanning e ottengo :
wconfig
lo no wireless extensions.

eth1 no wireless extensions.

eth0 IEEE 802.11b/g ESSID:"" Nickname:"Broadcom 4306"
Mode:Managed Access Point: Invalid
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

sit0 no wireless extensions.

linux-if3j:/home/user/madwifi-ng-r1821-20061124 # iwlist eth0 scanning
eth0 Interface doesn't support scanning : No such device

linux-if3j:/home/user/madwifi-ng-r1821-20061124 #

allora ravvio

e sempre dando gli stessi comandi (iwlist e iwconfig)ottengo nuovamente le stesse cose appena elencate.

guardando il log mi sono accorta che non vedeva il firmware allora lo estraggo con fwcutter

ESTraggo fwcutter in una cartella qualsiasi e do:
make
make install

scrivo bcm43xx-fwcutter e ottengo:
linux-if3j:/home/user/bcm43xx-fwcutter-006 # bcm43xx-fwcutter
bcm43xx-fwcutter version 006

Usage: bcm43xx-fwcutter [OPTION] [driver.sys]
-l|--list List supported driver versions
-i|--identify Only identify the driver file (don't extract)
-w|--target-dir DIR Extract and write firmware to DIR
-a|--alt-iv Extract alternative initvals (only 3.10.x.x)
-p|--postfix ".FOO" Postfix for firmware filenames (.FOO.fw)
-v|--version Print bcm43xx-fwcutter version
-h|--help Print this help

Example: bcm43xx-fwcutter bcmwl5.sys
to extract the firmware blobs from bcmwl5.sys

ALLORA DO IL SEGUENTE COMANDO:

linux-if3j:/home/user/bcm43xx-fwcutter-006 # bcm43xx-fwcutter -w /lib/firmware BCMWL564.SYS

filename : bcmwl564.sys
version : 3.70.17.5
MD5 : f5590c8784b91dfd9ee092d3040b6e40
microcodes : 2 4 5
pcms : 4 5

microcode : 2
revision : 0x0118
patchlevel : 0x0017
date : 2004-05-06
time : 21:34:00

microcode : 4
revision : 0x0118
patchlevel : 0x0017
date : 2004-05-06
time : 21:34:00

microcode : 5
revision : 0x0118
patchlevel : 0x0017
date : 2004-05-06
time : 21:34:00

extracting bcm43xx_microcode2.fw ...
extracting bcm43xx_microcode4.fw ...
extracting bcm43xx_microcode5.fw ...
extracting bcm43xx_pcm4.fw ...
extracting bcm43xx_pcm5.fw ...
extracting bcm43xx_initval01.fw ...
extracting bcm43xx_initval02.fw ...
extracting bcm43xx_initval03.fw ...
extracting bcm43xx_initval04.fw ...
extracting bcm43xx_initval05.fw ...
extracting bcm43xx_initval06.fw ...
extracting bcm43xx_initval07.fw ...
extracting bcm43xx_initval08.fw ...
extracting bcm43xx_initval09.fw ...
extracting bcm43xx_initval10.fw ...
linux-if3j:/home/user/bcm43xx-fwcutter-006 #

GUARDO NELLA CARTELLA /LIB/FIRMWARE E EFFETTIVAMENTE LI TROVO.

isabellakiss80 · 27 Dicembre 2006

llora restarto tutto e in var/log/messagge
ottengo la pappardella:

Dec 27 17:39:49 linux-if3j SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Dec 27 17:39:49 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:39:49 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:39:49 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:39:49 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:39:49 linux-if3j SuSEfirewall2: Warning: no interface active
Dec 27 17:39:49 linux-if3j SuSEfirewall2: batch committing...
Dec 27 17:39:50 linux-if3j SuSEfirewall2: Firewall rules successfully set
Dec 27 17:39:50 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:39:50 linux-if3j kernel: SoftMAC: Unable to find matching network after scan!
Dec 27 17:39:55 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:39:55 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:39:55 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:00 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:00 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:00 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:05 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:05 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:06 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:11 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:11 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:11 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:16 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:16 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:16 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:17 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:17 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:18 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:23 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:23 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:23 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:28 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:28 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:28 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:33 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:33 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:33 linux-if3j auditd[2974]: Audit daemon has no space left on logging partition
Dec 27 17:40:34 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:39 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:39 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:39 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:44 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:44 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:44 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:49 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:40:49 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:40:49 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:40:50 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:40:50 linux-if3j kernel: SoftMAC: Unable to find matching network after scan!
Dec 27 17:40:50 linux-if3j auditd[2974]: Audit daemon has no space left on logging partition
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: Radio turned off
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0200 (RX) max used slots: 0/64
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0220 (TX) max used slots: 366/512
Dec 27 17:40:50 linux-if3j kernel: bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
Dec 27 17:40:50 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 17:40:59 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:40:59 linux-if3j kernel: SoftMAC: Associate: failed to initiate scan. Is device up?
Dec 27 17:40:59 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:41:00 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 17:41:00 linux-if3j zmd: NetworkStatus (WARN): Network has been disconnected
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: PHY connected
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: Microcode rev 0x118, pl 0x17 (2004-05-06 21:34:00)
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: Radio turned on
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: Chip initialized
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: 32-bit DMA initialized
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: Keys cleared
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: Selected 802.11 core (phytype 2)
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:00 linux-if3j kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:41:00 linux-if3j kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
Dec 27 17:41:00 linux-if3j auditd[2974]: Audit daemon has no space left on logging partition
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:00 linux-if3j kernel: SoftMAC: Unable to find matching network after scan!
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Associate: Scanning for networks first.
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:01 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:02 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:02 linux-if3j kernel: SoftMAC: Unable to find matching network after scan!
Dec 27 17:41:07 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:07 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:07 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:12 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:12 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:12 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:17 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:17 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:18 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:23 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:23 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:23 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:28 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:28 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:28 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:33 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:33 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:34 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:39 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:39 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:39 linux-if3j kernel: SoftMAC: Scanning finished
Dec 27 17:41:44 linux-if3j kernel: SoftMAC: Start scanning with channel: 1
Dec 27 17:41:44 linux-if3j kernel: SoftMAC: Scanning 14 channels
Dec 27 17:41:44 linux-if3j kernel: SoftMAC: Scanning finished

[Risolto] Il Linux maledetto e l'hp pavillion zv 6000 inespugnabile

airex

diabo84

Ospite

isabellakiss80

Utente Attivo

airex

AMD64

diabo84

Ospite

"andrea"

Utente Attivo

isabellakiss80

Utente Attivo

"andrea"

Utente Attivo

isabellakiss80

Utente Attivo

airex

isabellakiss80

Utente Attivo

isabellakiss80

Utente Attivo

isabellakiss80

Utente Attivo

isabellakiss80

Utente Attivo