- 48
- 0
- CPU
- INTEL core2 CPU6600 2.4GHz
- Scheda Madre
- ASRock 4CIREDUAL
- HDD
- 250gb HD principale
- RAM
- DDRII 2gb (1+1)
- GPU
- ATI radeon HD 3600 series
- Monitor
- ACER v233h lcd 23''
- OS
- windows XP
Quella mobo la lascierei perdere visto che è M-ATX. :sisi:
Mentre parlando dell'H80 è lo stesso concetto: ha prestazioni anche superiori dell'hyper 612s (ci sono pareri discordanti) ma costa decisamente di più e fa più rumore. ;)
A quel punto la soluzione migliore sarebbe un Thermalright Macho HR-02 che si trova sui 50€ ed migliore di tutti quelli citati fino ad adesso. :D
allora è definitivo per la Scheda Madre Asus P8Z77-V LK Socket 1155 Intel Z77 DDR3 SATA3 USB3 ATX.
Sulla rumorosità di questi sistemi sto trovando un casino di pareri discordanti, ad esempio qui ci si lamenta http://www.tomshw.it/forum/raffreddamento/216403-corsair-h60-dalla-pompa-molto-rumorosa.html della rumorosità (nonostante le buone prestazioni di raffreddamento) ma ho letto anche di molti a cui non da il minimo problema di rumorosità. In definitiva pare sia un problema di voltaggio, quindi se ti capita una mobo e un ali che forniscono voltaggi anche leggermente diversi dai 12V allora il problema si presenta, ma a quel punto alcuni riescono a risolvere cambiano voltaggio da BIOS o cambiano connettore di alimentazione...Tale problema è presente anche in alcuni dissi ad aria.
EDIT: 07/02/2012 Released from Cooling Product Manager:
Quote:
“Corsair has now tracked down and fixed a rare and hard to reproduce issue on some of our Hydro series coolers, specifically the H60, H80, and H100 when used in combination with certain power supplies in certain circumstances. The failure will present itself as a buzz or hum, similar to a hard drive seek noise, and may disappear and reappear at random times. This issue affects a very small number of units, and typically is more prevalent on power supplies that provide higher than +12.2V on the +12V rail, which explains why some users have experienced multiple units with the same issue – they’re plugging them into the same power supply. Regardless, this has since been corrected and we are now shipping units that do not experience the issue. If you’ve got a noisy H100, H80, or H60 unit, and the noise is coming from the pump (not the fans), we’d like to offer you a RMA. Please Contact us by using the link on the left and request an RMA to start a replacement with a known good unit. Thank you, and we appreciate your patience as we corrected this issue. “ |
H60 / H80 / H100 “Buzzing” or “Grinding" - The Corsair Support Forums
- - - Updated - - -
Qui dice che il problema lo stavano risolvendo, ed essendo di luglio il PM, le probabilità che mi capiti un h60 rumoroso non dovrebbero essere altissime, ma sicuramente non basse-_-...Potrei provare a chiedere dissipatori da stock il più recenti possibile! In questo modo avrei un dissi a liquido prestante e anche silenzioso!!!