ubuntu feisty 7.04 e scanner

vrappa

Utente Attivo
114
3
Ciao a tutti e ancora tantissimi complimenti per questo meraviglioso forum.
ho un problema con il mio scanner, canonscan 3000ex.
in pratica lo scanner viene riconosciuto dalla mia ubuntu feisty fawn 7.04, in quanto quando digito da terminale lsusb mi viene fuori il seguente messaggio:
Bus 004 Device 002: ID 04a9:2215 Canon, Inc. CanoScan 3000/3000F/3000ex

ma al momento di far partire lo scanner con XSane al posto dello scanner mi riconosce la webcam...dove e cosa sbaglio?

questi sono i parametri della webcam in caso servissero:
Bus 002 Device 002: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake Eye WebCam
Ciao e grazie anticipatamente.
 

vrappa

Utente Attivo
114
3
Niente da fare.......helllppp...meeee
sto veramente uscendo pazzo....è una notte intera che sto qui a cercare di capirci qualcosa...dove e cosa sbaglio?

avviando Xsane al posto dello scanner mi si avvia la web cam...

digitando da konsole scanimage -L mi da questa shermata:

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

ma digitando sempre da konsole sane-find-scanner ottengo questo risultato:

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04a9 [Canon], product=0x2215 [CanoScan]) at libusb:004:002
found USB scanner (vendor=0x093a, product=0x2468) at libusb:003:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

intuisco che lo scanner è perfettamente riconosciuto, infatti questa è la stringa:

found USB scanner (vendor=0x04a9 [Canon], product=0x2215 [CanoScan]) at libusb:004:002

e questa invece è la stringa della webcam se non sbaglio:

found USB scanner (vendor=0x093a, product=0x2468) at libusb:003:003

sto veramente uscendo pazzo....è una notte intera che sto qui a capirci qualcosa...dove e cosa sbaglio?

Grazie anticipatamente.
 

Entra

oppure Accedi utilizzando
Discord Ufficiale Entra ora!