danilo1051
Utente Attivo
- Messaggi
- 75
- Reazioni
- 2
- Punteggio
- 28
Salve ragazzi, sto costruendo un server casalingo da lasciare 24h acceso.
Il server mi servirebbe per il DLNA, torrent, webserver, centralino voip.
Avevo visto su internet la APU 1C che consuma dai 6-12W con le seguenti caratteristiche:
il costo si aggira sui 149€ per la versione 2GB di ram, e 174€ per la versione 4GB.
Secondo voi posso trovare di meglio a questo prezzo?
Il server mi servirebbe per il DLNA, torrent, webserver, centralino voip.
Avevo visto su internet la APU 1C che consuma dai 6-12W con le seguenti caratteristiche:
• CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K data + 32K instruction + 512K L2 cache per core
• DRAM: 2 or 4 GB DDR3-1066 DRAM
• Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA + power connector.
• 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
• I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E
• Firmware: CoreBoot (please contact support@pcengines.ch for source code if desired).
• Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).
Fonte: PC Engines apu1c4 product file
• DRAM: 2 or 4 GB DDR3-1066 DRAM
• Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA + power connector.
• 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
• I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E
• Firmware: CoreBoot (please contact support@pcengines.ch for source code if desired).
• Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).
Fonte: PC Engines apu1c4 product file
Secondo voi posso trovare di meglio a questo prezzo?
Ultima modifica: