Buongiorno (e buone feste),
Da ieri il mio computer ha iniziato a lanciare BSOD a intervalli molto variabili (parlo dai 5 min dall'accensione a delle ore intere) in assenza di alcuna modifica sia software che hardware fatta al sistema.
Ho controllato gli aggiornamenti automatici di windows ma non risulta nessun update dal 03/12
Problemi simili li ho avuti quando mi è morto il mio povero vecchio HDD ma è successo meno di un mese fa e da allora ho reinstallato windows su un nuovo HDD.
Ho scaricato WhoCrashes e questo è quanto:
Crash Dump Analysis
Crash dump directory: C:\WINDOWS\Minidump
Crash dumps are enabled on your computer.
On Sat 09/12/2017 11:14:24 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-31140-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1640E0)
Bugcheck code: 0x133 (0x1, 0x1E00, 0xFFFFF8016E485370, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 09/12/2017 11:14:24 your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: hal.dll (hal+0x34C6)
Bugcheck code: 0x133 (0x1, 0x1E00, 0xFFFFF8016E485370, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\WINDOWS\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 10:28:59 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-30156-01.dmp
This was probably caused by the following module: fltmgr.sys (FLTMGR+0x689F)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF802CFB9689F, 0x0, 0x10)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\drivers\fltmgr.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Gestione filtri file system Microsoft
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 10:24:05 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-30062-01.dmp
This was probably caused by the following module: win32kbase.sys (win32kbase+0x3F7A4)
Bugcheck code: 0x3B (0xC0000005, 0xFFFF81C8805DF7A4, 0xFFFF8A029F05F1C0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\WINDOWS\system32\win32kbase.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Driver kernel Win32k di base
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 00:35:59 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-29125-01.dmp
This was probably caused by the following module: fvevol.sys (fvevol+0x344B0)
Bugcheck code: 0x1A (0x61941, 0xFFFFF808286344B0, 0x9, 0xFFFFA8812DE7F2F0)
Error: MEMORY_MANAGEMENT
file path: C:\WINDOWS\system32\drivers\fvevol.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: BitLocker Drive Encryption Driver
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue).
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
Da quel poco che ne capisco sembra possibile ci sia un driver che sta creando i problemi, sarebbe possibile risalire a quale? (Sfortunatamente non ho installato periferiche nuove di recente quindi non posso andare ad ovvia esclusione, inoltre non ho nemmeno eseguito update di recente di nessun driver)
Nello specifico il sistema è questo:
Windows 10 64bit Pro
MoBo: Asrock B150A-X1
Processore: Intel i5-6400 6th Gen
RAM: 2x 4GB DDR4
Scheda Video: AMD Radeon RX 480 8GB
HDD: WD Blue 1TB
Da ieri il mio computer ha iniziato a lanciare BSOD a intervalli molto variabili (parlo dai 5 min dall'accensione a delle ore intere) in assenza di alcuna modifica sia software che hardware fatta al sistema.
Ho controllato gli aggiornamenti automatici di windows ma non risulta nessun update dal 03/12
Problemi simili li ho avuti quando mi è morto il mio povero vecchio HDD ma è successo meno di un mese fa e da allora ho reinstallato windows su un nuovo HDD.
Ho scaricato WhoCrashes e questo è quanto:
Crash Dump Analysis
Crash dump directory: C:\WINDOWS\Minidump
Crash dumps are enabled on your computer.
On Sat 09/12/2017 11:14:24 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-31140-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1640E0)
Bugcheck code: 0x133 (0x1, 0x1E00, 0xFFFFF8016E485370, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 09/12/2017 11:14:24 your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: hal.dll (hal+0x34C6)
Bugcheck code: 0x133 (0x1, 0x1E00, 0xFFFFF8016E485370, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\WINDOWS\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 10:28:59 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-30156-01.dmp
This was probably caused by the following module: fltmgr.sys (FLTMGR+0x689F)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF802CFB9689F, 0x0, 0x10)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\drivers\fltmgr.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Gestione filtri file system Microsoft
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 10:24:05 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-30062-01.dmp
This was probably caused by the following module: win32kbase.sys (win32kbase+0x3F7A4)
Bugcheck code: 0x3B (0xC0000005, 0xFFFF81C8805DF7A4, 0xFFFF8A029F05F1C0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\WINDOWS\system32\win32kbase.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Driver kernel Win32k di base
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sat 09/12/2017 00:35:59 your computer crashed
crash dump file: C:\WINDOWS\Minidump\120917-29125-01.dmp
This was probably caused by the following module: fvevol.sys (fvevol+0x344B0)
Bugcheck code: 0x1A (0x61941, 0xFFFFF808286344B0, 0x9, 0xFFFFA8812DE7F2F0)
Error: MEMORY_MANAGEMENT
file path: C:\WINDOWS\system32\drivers\fvevol.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: BitLocker Drive Encryption Driver
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue).
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
Da quel poco che ne capisco sembra possibile ci sia un driver che sta creando i problemi, sarebbe possibile risalire a quale? (Sfortunatamente non ho installato periferiche nuove di recente quindi non posso andare ad ovvia esclusione, inoltre non ho nemmeno eseguito update di recente di nessun driver)
Nello specifico il sistema è questo:
Windows 10 64bit Pro
MoBo: Asrock B150A-X1
Processore: Intel i5-6400 6th Gen
RAM: 2x 4GB DDR4
Scheda Video: AMD Radeon RX 480 8GB
HDD: WD Blue 1TB