PROBLEMA Problema con HD Hitachi

Pubblicità

bongo74

Utente Attivo
Messaggi
821
Reazioni
47
Punteggio
62
ho un HITACHI, 1tb, 3.5 pollici (ds7sac100)
con XP inizia la formattazione e si blocca al 20%
con Debian si formatta, inizia l'installazione poi si inizia a bloccare, poi si sblocca ecc...

1) Esiste qualche software il live-cd che testi il tutto?
2) E' possibile isolare i settori dannegiati ed utilizzarne solo 1 parte?

grazie, non essendoci su un sistema operativo non riesco a leggere i dati smart
 
Dovresti mostrarci gli attributi smart ...
O installi l'hdd come disco secondario (cioè fai il boot del sistema da un altro hdd) oppure utilizza qualche programma DOS che sia in grado di mostrarti i valori degli attributi smart (esempio MHDD).

E' molto probabile che ci sia qualche settore danneggiato, che potrebbero essere segnalati dallo smart come settori riallocati e/o pendenti, ma ci possono essere altri motivi che potrebbero spiegare il mal funzionamento del drive (testine deboli, pcb difettosa, scheda madre o alimentatore che non funzionano correttamente, cavetti danneggiati).
 
up: su un altro pc (stessi cavetti dati e alimentazione)
Debian si installa senza blocchi
ecco i dati smart
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2940HQ3XWAMH
LU WWN Device Id: 5 000cca 35df7678b
Firmware Version: JP4OA3EA
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Jul 26 10:51:02 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10282) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 171) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 099 099 016 Pre-fail Always - 2
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 120 (Average 70)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1177
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 780
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1154
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1222
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1222
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 12/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
Sembrerebbe tutto apposto a parte i 2 errori sul primo attributo (Raw_Read_Error_Rate) causati quasi certamente da un mal funzionamento del pc.
Molto probabilmente il tuo pc ha qualche problema, forse l'alimentatore o la mobo, l'hdd (almeno apparentemente) sembra OK.
 
sul pc amd x3 440 l'hd veniva riconosciuto ma non si riusciva ad installare XP e neppure Debian
sul e8400 intel invece non si riesce a clonare windows10 dall'hd 250GB (altro hd funzionante) a questo Hitachi, perà installando Debian da 0 funziona tutto....

misteri!!
 
Pubblicità
Pubblicità
Indietro
Top