Passare a 10 Mega nel mio caso conviene?

[panfilo81]

Salve ragazzi
Veniamo subito al mio dubbio.
Ho un ADSL 7 Mega che è sempre andata bene nonostante io abiti in una zona isolata e di campagna.
Volevo passare alla 10 Mega, conviene farlo avendo queste statistiche? Ho un 3Com come router ed è sempre andato da Dio.
Vorrei precisare che in questo momento sto' scaricando da mega a 820 Kb/s

Ecco le mie statistiche.

[TABLE="width: 620"]
[TR]
[TD]

[TD="class: textCell"]Line Status[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]SHOWTIME[/TD]

[TD="class: textCell, width: 190"]Link Type[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]Interleaved Path[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Data Rate[/TD]

[TD="class: textCell, width: 190"]Stream Type[/TD]
[TD="class: textCell, width: 380, colspan: 2"]Actual Data Rate[/TD]

[TD="class: textCell, width: 190"]Up Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]478 (Kbps.)[/TD]

[TD="class: textCell, width: 190"]Down Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]8123 (Kbps.)[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Operation Data[/TD]

[TD="class: textCell, width: 185"]Operation Data [/TD]
[TD="class: textCell, width: 185"]Upstream [/TD]
[TD="class: textCell, width: 185"]Downstream[/TD]

[TD="class: textCell, width: 190"]Noise Margin[/TD]
[TD="class: textCell, width: 190"]28 dB[/TD]
[TD="class: textCell, width: 190"]14 dB[/TD]

[TD="class: textCell, width: 190"]Attenuation[/TD]
[TD="class: textCell, width: 190"]43 dB[/TD]
[TD="class: textCell, width: 190"]36 dB[/TD]

[TD="class: titleCell, colspan: 3"]Defect Indication[/TD]

[TD="class: textCell, width: 185"]Indicator Name [/TD]
[TD="class: textCell, width: 185"]Near End Indicator [/TD]
[TD="class: textCell, width: 185"]Far End Indicator[/TD]

[TD="class: textCell, width: 185"]Fast Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]33179100[/TD]

[TD="class: textCell, width: 185"]Fast Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]312067[/TD]

[TD="class: textCell, width: 185"]Loss of Signal Defect[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]---[/TD]

[TD="class: textCell, width: 185"]Fast Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[/TD]
[/TR]
[/TABLE]
Rimango a 7 o passo a 10?

Grazie

 

[skynet81]

Fai questi controlli all'impianto
Il blog di skynet81: Ottimizzare l'impianto domestico per ADSL

Strana l'attenuazione maggiore in up
Comunque la linea potenzialmente potrebbe tenere la 10 mega

 

[panfilo81]

Fai questi controlli all'impianto
Il blog di skynet81: Ottimizzare l'impianto domestico per ADSL

Strana l'attenuazione maggiore in up
Comunque la linea potenzialmente potrebbe tenere la 10 mega

Grazie Skynet
In tutte le prese telefoniche ho i filtri
Cosa intendi per stranezza?
Conosco il tuo blog, e' tra i miei preferiti.
:asd:
Attivata la 10 mega poco fa' online, vediamo come si comporta.

 

[ciscoman]

perdonami ma dove trovi un profilo commerciale a 10M ??

alla fine sono sempre 20M e nel tuo caso non mi sembra azzardato...inoltre io con adsl Olimontel ho 20M/1M in UP ! cosa che spesso non è con telecom up è di 300k !!!!!!!!

ADSL, ADSL 20 Mega, ADSL 7 Mega, internet 24 ore su 24, Copertura ADSL contattali a me hanno fatto una verifica della distanza da centrale potrebbe essere utile ne tuo caso....tanto la centrale è quella per tutti :-)

 

[panfilo81]

Linea attivata direi

[TABLE="width: 620"]
[TR]
[TD]

[TD="class: textCell"][/TD]
[TD="class: textCell"]Configured[/TD]
[TD="class: textCell"]Current[/TD]

[TD="class: textCell"]Line Status[/TD]
[TD="class: textCell"]---[/TD]
[TD="class: textCell, width: 190"]SHOWTIME[/TD]

[TD="class: textCell, width: 190"]Link Type[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]Fast Path[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Data Rate[/TD]

[TD="class: textCell"]Stream Type[/TD]
[TD="class: textCell, colspan: 2"]Actual Data Rate[/TD]

[TD="class: textCell"]Up Stream[/TD]
[TD="class: textCell, colspan: 2"]961 (Kbps.)[/TD]

[TD="class: textCell, width: 190"]Down Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]9485 (Kbps.)[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Operation Data[/TD]

[TD="class: textCell"]Operation Data[/TD]
[TD="class: textCell"]Upstream[/TD]
[TD="class: textCell"]Downstream[/TD]

[TD="class: textCell"]Noise Margin[/TD]
[TD="class: textCell, width: 190"]12 dB[/TD]
[TD="class: textCell, width: 190"]11 dB[/TD]

[TD="class: textCell, width: 190"]Attenuation[/TD]
[TD="class: textCell, width: 190"]43 dB[/TD]
[TD="class: textCell, width: 190"]36 dB[/TD]

[TD="class: titleCell, colspan: 3"]Defect Indication[/TD]

[TD="class: textCell"]Indicator Name[/TD]
[TD="class: textCell"]Near End Indicator[/TD]
[TD="class: textCell"]Far End Indicator[/TD]

[TD="class: textCell"]Fast Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]52[/TD]
[TD="class: textCell, width: 190"]6072194[/TD]

[TD="class: textCell, width: 185"]Fast Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]7154[/TD]

[TD="class: textCell, width: 185"]Loss of Signal Defect[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]---[/TD]

[TD="class: textCell, width: 185"]Fast Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Statistics[/TD]

[TD="class: textCell"]Received Bytes[/TD]
[TD="class: textCell, colspan: 2"]80396640[/TD]

[TD="class: textCell"]Transmitted Bytes[/TD]
[TD="class: textCell, colspan: 2"]14643168[/TD]

[/TD]
[/TR]
[/TABLE]


Speedtest

Visualizza allegato 162816

Sto scaricando da mega a 994 Kb/s
Per adesso soddisfatto, la provo un mese e vedo.

 

[skynet81]

Ottima linea non c'è che dire, se chiedi il profilo i165 andrai forse a banda piena della 10 mega

 

[panfilo81]

Spiegati meglio skynet.
Cosa dovrei chiedere?
Comunque stasera va malissimo.
Si inizia bene

Ecco il mio report

[TABLE="width: 620"]
[TR]
[TD]

[TD="class: textCell"][/TD]
[TD="class: textCell"]Configured[/TD]
[TD="class: textCell"]Current[/TD]

[TD="class: textCell, width: 190"]Line Status[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]SHOWTIME[/TD]

[TD="class: textCell, width: 190"]Link Type[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]Interleaved Path[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Data Rate[/TD]

[TD="class: textCell"]Stream Type[/TD]
[TD="class: textCell, colspan: 2"]Actual Data Rate[/TD]

[TD="class: textCell, width: 190"]Up Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]961 (Kbps.)[/TD]

[TD="class: textCell, width: 190"]Down Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]10509 (Kbps.)[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Operation Data[/TD]

[TD="class: textCell"]Operation Data[/TD]
[TD="class: textCell"]Upstream[/TD]
[TD="class: textCell, width: 185"]Downstream[/TD]

[TD="class: textCell, width: 190"]Noise Margin[/TD]
[TD="class: textCell, width: 190"]12 dB[/TD]
[TD="class: textCell, width: 190"]8 dB[/TD]

[TD="class: textCell, width: 190"]Attenuation[/TD]
[TD="class: textCell, width: 190"]43 dB[/TD]
[TD="class: textCell, width: 190"]36 dB[/TD]

[TD="class: titleCell, colspan: 3"]Defect Indication[/TD]

[TD="class: textCell"]Indicator Name[/TD]
[TD="class: textCell"]Near End Indicator[/TD]
[TD="class: textCell, width: 185"]Far End Indicator[/TD]

[TD="class: textCell, width: 185"]Fast Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]32851302[/TD]

[TD="class: textCell, width: 185"]Fast Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]74142[/TD]

[TD="class: textCell, width: 185"]Loss of Signal Defect[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]---[/TD]

[TD="class: textCell, width: 185"]Fast Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]8[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Statistics[/TD]

[TD="class: textCell"]Received Bytes[/TD]
[TD="class: textCell, colspan: 2"]3905873184[/TD]

[TD="class: textCell, width: 190"]Transmitted Bytes[/TD]
[TD="class: textCell, width: 380, colspan: 2"]274587312
[/TD]

http://www.speedtest.net/result/4420675317.png[/TD]
[/TR]
[/TABLE]

 

[skynet81]

Devi chiamare il 187 e chiedere che ti impostino il profilo che ti ho indicato, è gratuito e ti garantisce più banda
Può darsi che non troverai subito un operatore che te lo setta, in caso richiama

 

[panfilo81]

Devi chiamare il 187 e chiedere che ti impostino il profilo che ti ho indicato, è gratuito e ti garantisce più banda
Può darsi che non troverai subito un operatore che te lo setta, in caso richiama

Lo settano loro direttamente o devo aspettare?
Grazie

 

[Utente 137607]

Lo settano loro direttamente o devo aspettare?
Grazie

lo fanno immediatamente

 

[panfilo81]

lo fanno immediatamente

Grazie delle vostre risposte.
Domani provo a chiamare.
E se dovesse peggiorare la situazione questo profilo i165?

 

[Antonioys]

devi controllare la linea come ha detto skynet ha valori anonimi sistemala e firse puoi avere piu di 10 mega

 

[panfilo81]

Ragazzi scusate per il ritardo.
Ad un mese dall'attivazione della 10 mega questa è la situazione attuale

[TABLE="width: 620"]
[TR]
[TD]

[TD="class: textCell"][/TD]
[TD="class: textCell"]Configured[/TD]
[TD="class: textCell"]Current[/TD]

[TD="class: textCell"]Line Status[/TD]
[TD="class: textCell"]---[/TD]
[TD="class: textCell"]SHOWTIME[/TD]

[TD="class: textCell, width: 190"]Link Type[/TD]
[TD="class: textCell, width: 190"]---[/TD]
[TD="class: textCell, width: 190"]Fast Path[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Data Rate[/TD]

[TD="class: textCell"]Stream Type[/TD]
[TD="class: textCell, colspan: 2"]Actual Data Rate[/TD]

[TD="class: textCell"]Up Stream[/TD]
[TD="class: textCell, colspan: 2"]958 (Kbps.)[/TD]

[TD="class: textCell"]Down Stream[/TD]
[TD="class: textCell, width: 380, colspan: 2"]7902 (Kbps.)[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Operation Data[/TD]

[TD="class: textCell"]Operation Data[/TD]
[TD="class: textCell"]Upstream[/TD]
[TD="class: textCell"]Downstream[/TD]

[TD="class: textCell"]Noise Margin[/TD]
[TD="class: textCell"]12 dB[/TD]
[TD="class: textCell, width: 190"]13 dB[/TD]

[TD="class: textCell, width: 190"]Attenuation[/TD]
[TD="class: textCell, width: 190"]43 dB[/TD]
[TD="class: textCell, width: 190"]36 dB[/TD]

[TD="class: titleCell, colspan: 3"]Defect Indication[/TD]

[TD="class: textCell"]Indicator Name[/TD]
[TD="class: textCell"]Near End Indicator[/TD]
[TD="class: textCell"]Far End Indicator[/TD]

[TD="class: textCell"]Fast Path FEC Correction[/TD]
[TD="class: textCell"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path FEC Correction[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]149183[/TD]

[TD="class: textCell, width: 185"]Fast Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path CRC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]417[/TD]

[TD="class: textCell, width: 185"]Loss of Signal Defect[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]---[/TD]

[TD="class: textCell, width: 185"]Fast Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[TD="class: textCell, width: 185"]Interleaved Path HEC Error[/TD]
[TD="class: textCell, width: 190"]0[/TD]
[TD="class: textCell, width: 190"]0[/TD]

[/TD]
[/TR]
[TR]
[TD][/TD]
[/TR]
[TR]
[TD]

[TD="class: titleCell, colspan: 4"]Statistics[/TD]

[TD="class: textCell"]Received Bytes[/TD]
[TD="class: textCell, colspan: 2"]5290416[/TD]

[TD="class: textCell"]Transmitted Bytes[/TD]
[TD="class: textCell, colspan: 2"]854016[/TD]

[/TD]
[/TR]
[/TABLE]

Chiamato e mi hanno detto al 187 che il profilo i165 non è possibile settarlo, poichè una linea di attenuazione molto alta.
I cavi arrivano tramite i pali
Torno a 7 mega?
L'impianto è ok, e tutti i filtri sono installati.
La mia linea non regge i 10 mega?
L'operatore diceva che ho un profilo 440.
Ecco lo speedtest



Ecco anche i dati della centrale

[TABLE="width: 560"]
[TR]
[TD="colspan: 2"][TABLE="class: tabellaofferta, width: 550"]
[TR]
[TH="class: txtleft, colspan: 2"]Centrale[/TH]
[/TR]
[TR]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TD="class: txtleft, width: 120"]CLLI[/TD]
[TD="class: txtleft"]CPANITAL[/TD]
[/TR]
[TR]
[TD="class: txtleft, width: 120"]IDBRE AdC[/TD]
[TD="class: txtleft"]3349[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT[/TD]
[TD="class: txtleft"]587001[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT SGU[/TD]
[TD="class: txtleft"]587007[/TD]
[/TR]
[/TABLE]
[/TD]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TD="class: txtleft, width: 120"]Descrizione[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Comune[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Indirizzo[/TD]
[TD="class: txtleft"]VOLTERRANA 302[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Impianto - Locale[/TD]
[TD="class: txtleft"]SL - LS[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[TR]
[TD="colspan: 2"] [TABLE="class: tabellaofferta, width: 550"]
[TR]
[TH="class: txtleft, colspan: 2"]ADSL[/TH]
[/TR]
[TR]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TH="colspan: 2"]ATM[/TH]
[/TR]
[TR]
[TD="class: txtleft, width: 120"]Banda[/TD]
[TD="class: txtleft"]fino a 7 Mbps[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Stato[/TD]
[TD="class: txtleft"] Satura [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Ampliamento[/TD]
[TD="class: txtleft"]ampliamento non previsto[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Semaforo giallo[/TD]
[TD="class: txtleft"] No [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Ris. innesco semaf.[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Uso %[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Nome sede[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]CLLI[/TD]
[TD="class: txtleft"]CPANITAL[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE Sede[/TD]
[TD="class: txtleft"]008700[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE AdC[/TD]
[TD="class: txtleft"]003349[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT[/TD]
[TD="class: txtleft"]587001[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Tecnologia[/TD]
[TD="class: txtleft"]DSLAM ATM SIEMENS[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Tipo DSLAM[/TD]
[TD="class: txtleft"]Standard da centrale[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Note[/TD]
[TD="class: txtleft"]da sature per banda/porte a sature per EoS[/TD]
[/TR]
[/TABLE]
[/TD]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TH="colspan: 2"]ETH[/TH]
[/TR]
[TR]
[TD="class: txtleft, width: 120"]Banda[/TD]
[TD="class: txtleft"]fino a 20 Mbps[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Stato[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Ampliamento[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Semaforo giallo[/TD]
[TD="class: txtleft"] No [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Ris. innesco semaf.[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Uso %[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Nome sede[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]CLLI[/TD]
[TD="class: txtleft"]CPANITAL[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE Sede[/TD]
[TD="class: txtleft"]008700[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE AdC[/TD]
[TD="class: txtleft"]003349[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT[/TD]
[TD="class: txtleft"]587001[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Tecnologia[/TD]
[TD="class: txtleft"]HUAWEI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Tipo DSLAM[/TD]
[TD="class: txtleft"]Standard da centrale[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Note[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[TR]
[TD="colspan: 2"] [TABLE="class: tabellaofferta, width: 550"]
[TR]
[TH="class: txtleft, colspan: 2"]HDSL[/TH]
[/TR]
[TR]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TH="colspan: 2"] SHDSL su DSLAM ATM
1Mbit/s 1.6Mbit/s 4Mbit/s Bonding [/TH]
[/TR]
[TR]
[TD="class: txtleft, width: 120"]Stato[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Ampliamento[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[TR]
[TD="class: txtleft"]Nome sede[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]CLLI[/TD]
[TD="class: txtleft"]CPANITAL[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE Sede[/TD]
[TD="class: txtleft"]008700[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE AdC[/TD]
[TD="class: txtleft"]003349[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT[/TD]
[TD="class: txtleft"]587001[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Tecnologia[/TD]
[TD="class: txtleft"]SIEMENS[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Note[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[/TABLE]
[/TD]
[TD] [TABLE="class: tabellaofferta, width: 260"]
[TR]
[TH="colspan: 2"] SHDSL 2Mbit/s
4Mbit/s IMA - 6Mbit/s IMA - 8Mbit/s IMA [/TH]
[/TR]
[TR]
[TD="class: txtleft, width: 120"]Stato 2M[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Stato 4M[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Stato 6M[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Stato 8M[/TD]
[TD="class: txtleft"] Attiva [/TD]
[/TR]
[TR]
[TD="class: txtleft"]Nome sede[/TD]
[TD="class: txtleft"]CAPANNOLI[/TD]
[/TR]
[TR]
[TD="class: txtleft"]CLLI[/TD]
[TD="class: txtleft"]CPANITAL[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE Sede[/TD]
[TD="class: txtleft"]008700[/TD]
[/TR]
[TR]
[TD="class: txtleft"]IDBRE AdC[/TD]
[TD="class: txtleft"]003349[/TD]
[/TR]
[TR]
[TD="class: txtleft"]GAT[/TD]
[TD="class: txtleft"]587001[/TD]
[/TR]
[TR]
[TD="class: txtleft"]Note[/TD]
[TD="class: txtleft"][/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]

 

[Utente 137607]

fatti mettere il profilo i141 a 6db e hai portante piena

 

[panfilo81]

Ma allora i141 o i165?
Attendo il parere del guru Skynet
Aggiornamento