Microfono in un hp touch smart 820iq con o.s. Ubuntu???

Pubblicità

Kanna

Utente Attivo
Messaggi
47
Reazioni
1
Punteggio
26
io possiedo tutte le versioni di ubuntu a partire dal 9.10 sino a quest'ultimo (10.10), ma in tutte queste versioni non ha mai funzionato il microfono nel mio PC.. come mai?? esiste un modo per farlo andare?? se si, quale? oppure serve un programma apposito?
nel prossimo ubuntu 11.04 funzionerà?? (secondo me no ;))
grazie di tutto
 
Ultima modifica:
Rispondo io perchè conosco bene il suo pc. È un fisso hp all in one multitouch. Ho provato a smanettare un po' io in alsamixer ma niente. Addirittura gli ho fatto comprare un microfono esterno e non funziona neppure quello! lspci però te lo deve postare kanna... ;-)
 
un microfono esterno non funziona? e tuttavia funziona l'output audio? è decisamente curioso

non è che di default viene settato su muted?
 
Nono, ho guardato anche su alsamixer ma è tutto al massimo, comunque neanche le casse interne non andavano ma ha risolto (kanna) comprando delle casse esterne... Per il microfono invece non so/sa più cosa fare...
 
Ho già cambiato 3 microfoni esterni ma niente!! Non ne vuole sapere di funzionare. Adesso ho un microfono esterno philips ma neanche questo non va... Vi posto lsusb poi mi saprete dire cosa fare perchè io non lo so più... Grazie
 
ti sto chiedendo i dati perchè credo di conoscere il modo di farlo funzionare. Mi è già capitato su altri pc.

generalmente fixo così:

apro la configurazione di alsa

sudo nano /etc/modprobe.d/alsa-base




inserisco alla fine del file la riga:

options snd-hda-intel model=hp


nel tuo caso la riga da aggiungere potrebbe essere un pò diversa, ma se non conosco la scheda madre non so dirlo.. Cmq prova così e mi fai sapere.
 
lspci mi restituisce:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 04)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
01:01.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
03:00.0 Multimedia video controller: NEC Corporation Device 0165 (rev 0b)
04:00.0 Network controller: RaLink RT2860
05:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GS] (rev a1)

lsusb:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 03f0:140c Hewlett-Packard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 1926:0003 NextWindow 1900 HID Touchscreen
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 04f2:b056 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 03f0:150c Hewlett-Packard Mood Lighting (Microchip Technology Inc.)
Bus 001 Device 005: ID 1934:0602 Feature Integration Technology Inc. (Fintek) F71610 or F71612 Consumer Infrared Receiver/Transceiver
Bus 001 Device 004: ID 0424:2507 Standard Microsystems Corp.
Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 
sudo nano /etc/modprobe.d/alsa-base



e prova con UNA di queste altre:

options snd-hda-intel model=hp-laptop

OPPURE

options snd-hda-intel model=laptop



ovviamente verificando anche i volumi con alsamixer.



P.S.

posta anche cosa ti da il comando:

aplay -l (ELLE)
 
ho provato a modificare alsa-base.conf con una delle stringhe che mi hai detto ma niente, non va. Questo è il risultato di aplay -l:
**** Lista di PLAYBACK dispositivi hardware ****
scheda 0: Intel [HDA Intel], dispositivo 0: AD198x Analog [AD198x Analog]
Sottoperiferiche: 0/1
Sottoperiferica #0: subdevice #0
scheda 0: Intel [HDA Intel], dispositivo 1: AD198x Digital [AD198x Digital]
Sottoperiferiche: 1/1
Sottoperiferica #0: subdevice #0
 
ho letto in rete questo consiglio:

sudo gedit /etc/modprobe.d/alsa-base.conf
se ci sono le tre righe in fondo:
options snd-hda-intel model=3stack enable=yes
options snd-hda-intel model=auto position_fix=1 enable=yes
options snd_hda_intel model=hp-dv5
commentale con #
e inserisci Codice:

options snd-hda-intel model=touchsmart



ovviamente smanetta coi volumi
 
Pubblicità
Pubblicità
Indietro
Top