- 41,792
- 14,168
- CPU
- 5600X
- Dissipatore
- Arctic Liquid Freezer 240
- Scheda Madre
- ASUS ROG STRIX B550-F GAMING (WI-FI)
- HDD
- 1 SSD 1TB M.2 NVMe Samsung 970 Evo plus 4 HDD P300 3TB ciascuno
- RAM
- 2x8GB Crucial Ballistix 3600 MHz
- GPU
- RTX 3060 Ti
- Monitor
- AOC 24G2U 144 Hz
- PSU
- EVGA G2 750W
- Case
- NZXT H510
- Periferiche
- Varie
- Net
- FTTC 100/30
- OS
- Windows 10, Debian 10
Comunque MEGGER è un marchio britannico di strumenti non è identificativo di un tipo di strumento.accettano paypal?
l'rs ha le stesse specifiche del fluke?
Electrical test equipment | power station to plug | Megger
Megger makes electrical test equipment to help you install, improve efficiency and extend the life of electrical assets and cable networks at high, medium and low voltage
megger.com
RS PRO Model Number IIT1500
Tester Type Insulation Multimeter
Display type Auto Backlit Analog Bar Graph Display
Maximum Insulation Resistance Measurement 20GΩ
Insulation Test Range 0.01MΩto 20GΩ
Insulation Test Voltages 50V / 100V / 250V / 500V / 1000 V
Short-circuit test current Nominal 1mA
Overload Indication Yes
Temperature Coefficient 0.1×(spec. Acc’y)/℃ <18℃, >28℃
Memory 4000 counts
Calibration Available Yes
Applications Insulation Testing
Output Voltage Display Range Resolution Test Current Accuracy
50V 4MΩ to 40MΩ 0.001MΩ 1 mA @ 50kΩ ± (3 % + 5)
250V 4MΩ to 40MΩ 0.001MΩ 1 mA @ 250kΩ ± (3 % + 5)
500V 4MΩ to 40MΩ 0.001MΩ 1 mA @ 500kΩ ± (3 % + 5)
1000V 4MΩ to 40MΩ 0.001MΩ 1 mA @1000kΩ ± (3 % + 5)
Fluke 1507
Precisione | Gamma | 600,0 V |
Risoluzione | 0,1 V | |
Da 50 Hz a 400 Hz ± (% della misura + punti) | ± (2% + 3) | |
Impedenza di ingresso | 3 MΩ (nominale), < 100 pF | |
Tasso di reiezione di modo comune (sbilanciamento 1 kΩ): | > 60 dB in DC, 50 o 60 Hz | |
Protezione sovraccarico | 600 V RMS o DC | |
Misure di resistenza del collegamento a terra | ||
Intervallo/risoluzione | 20,00 Ω | 0,01 Ω |
200,0 Ω | 0,1 Ω | |
2.000 Ω | 1,0 Ω | |
20,00 kΩ | 0,01 kΩ | |
Precisione | ± (1,5% + 3) | |
Protezione sovraccarico | 2 V RMS o DC | |
Tensione di prova a circuito aperto | > 4,0 V, < 8 V | |
Corrente cortocircuito | > 200,0 mA | |
Specifiche di isolamento | ||
Gamma di misura | Da 0,01 MΩ a 10 GΩ | |
Tensione di prova | 50 V, 100 V, 250 V, 500 V e 1.000 V | |
Precisione della tensione di prova | + 20%, - 0% | |
Corrente cortocircuito | 1 mA nominale | |
Scarica automatica | Tempo di scarica, < 0,5 secondi per C = 1 µF o inferiore | |
Indicatore di circuito sotto tensione | Impedisce il test se la tensione del terminale è > 30 V prima dell'inizio del test | |
Carico capacitivo massimo | Utilizzabile con carichi fino a 1 µF | |
Precisione di misurazione | 50 V | ± (3% + 5) |
100 V | ± (3% + 5) | |
250 V | ± (1,5% + 5) | |
500 V | ± (1,5% + 5) | |
1.000 V | ± (1,5% + 5) fino a 2.000 MΩ, ± (10% + 3) oltre 2.000 MΩ | |
Specifiche generali | ||
Tensione massima applicata a ciascun terminale: | 600 V rms AC o DC |
L'RS pro è un pò meno preciso ma bisogna vedere se tutta quella precisione gli serve perchè costa 200 euro in meno