Ciao a tutti, sto riscontrando alcuni crash sul mio pc, l'ultimo risale a stasera subito all'avvio. Di seguito le specifiche hardware e i reports di WhoCrashed:
- Processore Intel I7-9700k
- Gigabyte Nvidia RTX 2070 Super
- Scheda madre Gigabyte Aorus Z390 Ultra
- RAM Corsair Vengeance RGB Pro 16 gb DDR4 3200 mhz
- SSD Samsung M.2 970 Evo 1tb
- SSD Samsung 860 Evo 1tb
Ho notato inoltre che all'avvio di Windows fa diversi suoni dei drivers e anche quando il monitor si riattiva dallo stand by, ci mette un po' di secondi e fa il suono come se ci fossero problemi di drivers. I drivers della scheda video sono aggiornati. Cosa può essere?
- Processore Intel I7-9700k
- Gigabyte Nvidia RTX 2070 Super
- Scheda madre Gigabyte Aorus Z390 Ultra
- RAM Corsair Vengeance RGB Pro 16 gb DDR4 3200 mhz
- SSD Samsung M.2 970 Evo 1tb
- SSD Samsung 860 Evo 1tb
On Mon 27/01/2020 22:51:08 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\012720-6796-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x13F321)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF8022733F321, 0xFFFFAC014ED099C8, 0xFFFFB0003D7EF930)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 27/01/2020 22:51:08 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!memset+0x6864)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF8022733F321, 0xFFFFAC014ED099C8, 0xFFFFB0003D7EF930)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug check description: This bug check indicates that a system thread generated an exception that the error handler did not catch.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sun 26/01/2020 11:01:34 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\012620-7078-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1C14E0)
Bugcheck code: 0x139 (0x1D, 0xFFFFBB86DFC72E30, 0xFFFFBB86DFC72D88, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sun 29/12/2019 10:38:55 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\122919-6703-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1C14E0)
Bugcheck code: 0x1A (0x403, 0xFFFF82010DA85F08, 0x81000003B3C12867, 0xFFFF820113044BE0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred. The page table and PFNs are out of sync . This is probably a hardware error, especially if parameters 3 & 4 differ by only a single bit.
This is likely to be caused by a hardware problem. This error suggests a case of memory corruption because of a hardware problem. It is suggested you do a test on your RAM modules (memory test) and make sure your system is not getting overheated. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Ho notato inoltre che all'avvio di Windows fa diversi suoni dei drivers e anche quando il monitor si riattiva dallo stand by, ci mette un po' di secondi e fa il suono come se ci fossero problemi di drivers. I drivers della scheda video sono aggiornati. Cosa può essere?