Telecom Alice Internet Play non va come dovrebbe

Pubblicità
Stato
Discussione chiusa ad ulteriori risposte.

giangy11

Nuovo Utente
Messaggi
113
Reazioni
30
Punteggio
40
Ciao a tutti, ho un problea con internet play di alice:
ho attivato l'opzione play sulla mia linea 7megabit, purtroppo non noto alcun miglioramento, il ping rimane a 70ms circa sia su test.ngi.it che pingando da cmd 192.168.100.1 (nas intranet di telecom) o altri ip di test come maya.ngi.it

mi ha contattato un tecnico telecom parecchio preparato e mi ha detto che ha già settato la mia linea in fast, addirittura ha alzato di qualcosa la banda in upload da 384 kbps a circa 500kbps, dicendo che in alcuni casi poteva migliorare la situazione, ma non è cambiato nulla.

Sostiene che l'unica prova che rimane da fare è con un router telecom, intanto vi allego le mie statistiche con l'attuale dlink 2740b versione F1 con firmware ultimo appena uscito:

Mode: ADSL_2plus
Traffic Type: ATM
Status: Up
Link Power State: L0

Downstream Upstream
Line Coding(Trellis): On On
SNR Margin (0.1 dB): 166 165
Attenuation (0.1 dB): 315 180

Output Power (0.1 dBm): 193 123
Attainable Rate (Kbps): 12648 948

Path 0
Downstream Upstream
Rate (Kbps): 8128 829

MSGc (# of bytes in overhead channel message): 59 16
B (# of bytes in Mux Data Frame): 254 25
M (# of Mux Data Frames in FEC Data Frame): 1 1
T (Mux Data Frames over sync bytes): 1 3
R (# of check bytes in FEC Data Frame): 0 0
S (ratio of FEC over PMD Data Frame length): 1.0 0.9904
L (# of bits in PMD Data Frame): 2040 210
D (interleaver depth): 1 1
Delay (msec): 0.25 0.24
INP (DMT symbol): 0.0 0.0

Super Frames: 0 0
Super Frame Errors: 26 0
RS Words: 0 0
RS Correctable Errors: 0 0
RS Uncorrectable Errors: 0 0

HEC Errors: 89 0
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 44146128 4500168
Data Cells: 3757622 217273
Bit Errors: 0 0

Total ES: 24 0
Total SES: 0 0
Total UAS: 0 0


SNR e attenuazione sono abbastanza buoni mi pare, secondo il tecnico disto a circa 2,3-2,5km max dalla centrale, inoltre mi ha detto che sono già sulla loro gigabit ethernet (e non sulla atm) quindi non avrò problemi di saturazione di banda.

Secondo voi cosa mi resta da fare? vedo di gente che fa 5-10-20ms come ping
icon_dho.gif


- - - Updated - - -

queste le statistiche collegando direttamente il router alla presa telefonica principale senza telefoni e filtri collegati, come vede cambia quasi nulla

[TABLE="class: formlisting, width: 534"]
[TR]
[TD="class: hd, colspan: 2"]Mode:[/TD]
[TD]ADSL_2plus[/TD]
[/TR]
[TR]
[TD="class: hd, colspan: 2"]Traffic Type:[/TD]
[TD]ATM[/TD]
[/TR]
[TR]
[TD="class: hd, colspan: 2"]Status:[/TD]
[TD]Up[/TD]
[/TR]
[TR]
[TD="class: hd, colspan: 2"]Link Power State:[/TD]
[TD]L0[/TD]
[/TR]
[TR]
[TD="colspan: 3"] [/TD]
[/TR]
[TR]
[TD="class: hd"] [/TD]
[TD="class: hd"]Downstream[/TD]
[TD="class: hd"]Upstream[/TD]
[/TR]
[TR]
[TD="class: hd"]Line Coding(Trellis):[/TD]
[TD]On[/TD]
[TD]On[/TD]
[/TR]
[TR]
[TD="class: hd"]SNR Margin (0.1 dB):[/TD]
[TD]157[/TD]
[TD]167[/TD]
[/TR]
[TR]
[TD="class: hd"]Attenuation (0.1 dB):[/TD]
[TD]310[/TD]
[TD]181[/TD]
[/TR]
[TR]
[TD="class: hd"]Output Power (0.1 dBm):[/TD]
[TD]193[/TD]
[TD]123[/TD]
[/TR]
[TR]
[TD="class: hd"]Attainable Rate (Kbps):[/TD]
[TD]11508[/TD]
[TD]945[/TD]
[/TR]
[TR]
[TD="colspan: 5"] [/TD]
[/TR]
[TR]
[TD="class: hd"] [/TD]
[TD="class: hd"]Path 0[/TD]
[TD="class: hd"] [/TD]
[/TR]
[TR]
[TD="class: hd"] [/TD]
[TD="class: hd"]Downstream[/TD]
[TD="class: hd"]Upstream[/TD]
[/TR]
[TR]
[TD="class: hd"]Rate (Kbps):[/TD]
[TD]8128[/TD]
[TD]829[/TD]
[/TR]
[TR]
[TD="colspan: 5"] [/TD]
[/TR]
[TR]
[TD="class: hd"]MSGc (# of bytes in overhead channel message):[/TD]
[TD]59[/TD]
[TD]16[/TD]
[/TR]
[TR]
[TD="class: hd"]B (# of bytes in Mux Data Frame):[/TD]
[TD]254[/TD]
[TD]25[/TD]
[/TR]
[TR]
[TD="class: hd"]M (# of Mux Data Frames in FEC Data Frame):[/TD]
[TD]1[/TD]
[TD]1[/TD]
[/TR]
[TR]
[TD="class: hd"]T (Mux Data Frames over sync bytes):[/TD]
[TD]1[/TD]
[TD]3[/TD]
[/TR]
[TR]
[TD="class: hd"]R (# of check bytes in FEC Data Frame):[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]S (ratio of FEC over PMD Data Frame length):[/TD]
[TD]1.0[/TD]
[TD]0.9904[/TD]
[/TR]
[TR]
[TD="class: hd"]L (# of bits in PMD Data Frame):[/TD]
[TD]2040[/TD]
[TD]210[/TD]
[/TR]
[TR]
[TD="class: hd"]D (interleaver depth):[/TD]
[TD]1[/TD]
[TD]1[/TD]
[/TR]
[TR]
[TD="class: hd"]Delay (msec):[/TD]
[TD]0.25[/TD]
[TD]0.24[/TD]
[/TR]
[TR]
[TD="class: hd"]INP (DMT symbol):[/TD]
[TD]0.0[/TD]
[TD]0.0[/TD]
[/TR]
[TR]
[TD="colspan: 5"] [/TD]
[/TR]
[TR]
[TD="class: hd"]Super Frames:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]Super Frame Errors:[/TD]
[TD]3[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]RS Words:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]RS Correctable Errors:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]RS Uncorrectable Errors:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="colspan: 5"] [/TD]
[/TR]
[TR]
[TD="class: hd"]HEC Errors:[/TD]
[TD]11[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]OCD Errors:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]LCD Errors:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]Total Cells:[/TD]
[TD]1076707[/TD]
[TD]106128[/TD]
[/TR]
[TR]
[TD="class: hd"]Data Cells:[/TD]
[TD]41540[/TD]
[TD]4948[/TD]
[/TR]
[TR]
[TD="class: hd"]Bit Errors:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="colspan: 5"] [/TD]
[/TR]
[TR]
[TD="class: hd"]Total ES:[/TD]
[TD]3[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]Total SES:[/TD]
[TD]0[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: hd"]Total UAS:[/TD]
[TD]104[/TD]
[TD]104[/TD]
[/TR]
[/TABLE]
 
Stato
Discussione chiusa ad ulteriori risposte.
Pubblicità
Pubblicità
Indietro
Top