Salve a tutti,
come da titolo sto sperimentando frequenti BSOD da quando ho upgradato la RAM. Per assicurarmi che i banchi comprati (2*2 GB Kingston) non fossero difettosi ho eseguito un memtest. Testandoli in coppia, nel pass 4 sono stati riscontrati 8 errori. Ho eseguito allora il test sui singoli banchi ma non ci sono stati errori, ho anche cambiato slot pensando potessi avere degli slot difettosi sulla mobo e nuovamente non ho riscontrato errori. Ho eseguito allora un clear CMOS e ritestato i moduli sia in coppia che singolarmente (per circa 10h) nessun errore. Ho provato allora a attivare driver verifier per capire se potesse essere un problema software e il risultato è che il pc non si avvia e viene mostrata una BSOD con il messaggio di STOP 0x000000C4 .
Ho salvato i minidump ma non so davvero che pesci prendere.
Testando l'hard disk ho notato che ci sono dei settori corrotti,potrebbe essere l' HD la causa di tutto?
Help please :mc:
EDIT: aggiunti minidump
come da titolo sto sperimentando frequenti BSOD da quando ho upgradato la RAM. Per assicurarmi che i banchi comprati (2*2 GB Kingston) non fossero difettosi ho eseguito un memtest. Testandoli in coppia, nel pass 4 sono stati riscontrati 8 errori. Ho eseguito allora il test sui singoli banchi ma non ci sono stati errori, ho anche cambiato slot pensando potessi avere degli slot difettosi sulla mobo e nuovamente non ho riscontrato errori. Ho eseguito allora un clear CMOS e ritestato i moduli sia in coppia che singolarmente (per circa 10h) nessun errore. Ho provato allora a attivare driver verifier per capire se potesse essere un problema software e il risultato è che il pc non si avvia e viene mostrata una BSOD con il messaggio di STOP 0x000000C4 .
Ho salvato i minidump ma non so davvero che pesci prendere.
Testando l'hard disk ho notato che ci sono dei settori corrotti,potrebbe essere l' HD la causa di tutto?
Help please :mc:
EDIT: aggiunti minidump
Codice:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: xNtKrnl.exe
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff8000355f5a8, 0xfffff880039e71b8,
0xfffff880039e6a20)
*** xNtKrnl.exe - Address 0xfffff8000355f5a8 base at 0xfffff8000321f000 DateStamp
0x4d9fdd34
Codice:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: intelppm.sys
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x00000d700079db58, 0x0000000000000002, 0x0000000000000001,
0xfffff800032da3a4)
*** intelppm.sys - Address 0xfffffa800038a390 base at 0xfffff88003dd5000 DateStamp
0x4a5bc0fd
Codice:
problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: raspppoe.sys
MEMORY_MANAGEMENT
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001a (0x0000000000041790, 0xfffffa80019a9340, 0x000000000000ffff,
0x0000000000000000)
*** raspppoe.sys - Address 0xfffffa80019a9340 base at 0xfffff88003f6d000 DateStamp
0x4a5bcce9
Codice:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: CI.dll
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff88000e99714, 0xfffff88006bccc10,
0x0000000000000000)
*** CI.dll - Address 0xfffff88000e99714 base at 0xfffff88000e4a000 DateStamp
0x4ce7c944
Codice:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: raspppoe.sys
MEMORY_MANAGEMENT
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001a (0x0000000000041790, 0xfffffa80019a9340, 0x000000000000ffff,
0x0000000000000000)
*** raspppoe.sys - Address 0xfffffa80019a9340 base at 0xfffff88003f6d000 DateStamp
0x4a5bcce9
Codice:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: atikmdag.sys
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x000016a001239d48, 0x0000000000000002, 0x0000000000000000,
0xfffff80003501115)
*** atikmdag.sys - Address 0xfffff88004afb4fc base at 0xfffff88004a16000 DateStamp
0x4f7e4b69
