PROBLEMA freezing, then 5 beeps during post on working GPU!

Pubblicità
M

MadnewMax

Nuovo Utente
Messaggi
4
Reazioni
0
Punteggio
2
Buonasera, mi chiamo Max e sper possiate leggere in inglese... :-) grazie!

I got a pc freezing while playing, so this load should be considered...
After restart, the post failed with 5 beeps on gigabyte H470 HD3 (the GPU is 670GTX).
I then tried another pciex gpu, an old one (9600GT), and also this was failing at post with 5 beeps.
I then tried a new cheap one, but without the 12 V 6pin connector that was not needed for this board (geforce 210), and in this case the post is ok and now the pc is working normally.
So I thought the GPU (both 670 and 9600) were faulty, but I then tested both of them on another PC (a friend I cannot disturb more :-/ ) and both of them are working.
So now I think the failure could be either the MB or the PSU.
My questions are:
1-being the PC now working perfectly, can I exclude MB or there might be some failure still in the MB?
2-PSU may be a cause even if the PC is working? The load is not the same, but a failure like that is possible?
3-what do you suggest?
 
Hi, I did some more test and the problem seems becoming more and more difficult.
So I just retest with the three GPU that I have:
Geforce 210 - system boot and everything works fine - this GPU does not require 12 V input
Geforce GT9600 - 5 beeps at boot but then, when windows go up, everything start working and monitor is on (!!!)- this GPU requires one 12 V input
Geforce GTX610 (the initial GPU that worked for 5 years on this system) - the PSU made a sound of break and switched off (!!!)

OK, then I thought my friends of the forum were right.
I bought a new PSU from Cool Master and I've updated my PC.

Geforce GTX610 (the initial GPU that worked for 5 years on this system) - 5 beeps at boot and no signal to monitor (!!! :-( )
Geforce GT9600 - 5 beeps at boot but then, when windows go up, everything start working and monitor is on - this GPU requires one 12 V input
(I suppose Geforce 210 is still working without beeps)

What conclusion my I have? The PSU was faulty but why now it keeps like that?
PCIe seems to work but still not with the GTX610?
So, I've kept the GT9600 in order to keep the 12 V input and check the behavior, but I cannot get rid of the 5 beeps at startup (I just note that I've tested the 9600 on another PC and it is fine).
Moreover why it start working when windows go up?

I'm getting lost and crazy... :-(

Thank you for your help

Ciao,
Max
 
Hi, then I've made some more test.
The GTX670 is working fine on the second PCIe slot (x4) still not on the first (x16) where is working fine the 210 and the 9600GT (with black screen during post and then working after windows is up (I think because it is not uefi)). What do you suggest? thank you so much
 
Pubblicità
Pubblicità
Indietro
Top