PROBLEMA Errore condivisione Samba

manuelp

Nuovo Utente
116
12
CPU
Ryzen 7 5700x
Dissipatore
Corsair H110 280mm
Scheda Madre
Asus x570 ROG Crosshair VIII Hero
HDD
Sandisk Extreme PRO 500gb M2 NVME
RAM
4x8Gb Crucial Ballistix RGB 3200Mhz cl.16
GPU
RTX 3060Ti Gaming X Trio
Audio
Schiit Hel + Beyerdynamic dt990 edition 32 ohm
Monitor
Pixio PX7 Prime 165Hz Freesync QHD
PSU
Antec HCG Gold 650W
Case
NZXT H440
Periferiche
CM Masterkeys SK650, ROG Gladius III
Net
FTTH 1000
OS
Win 11 Pro
Ciao, sono un neofita del mondo linux, ho da poco installato ubuntu 16.04 lts su un vecchio notebook privo di monitor (comandato con vnc o putty). Ho la necessità di condividere 1 cartella su disco locale e 2 hard disk esterni 3.5 sulla rete locale. Dopo aver installato samba e configurato tramite gui le condivisioni, la cartella locale ed 1 hard disk esterno sono accessibili (dai miei raspberry e pc windows) mentre il secondo hard disk viene rilevato in rete ma quando tento di accedervi mi da: permesso negato - autorizzazioni mancanti.

N.B. Tutti e due gli hard disk vengono montati manualmente allo startup, il procedimento fatto per configurare la condivisione è lo stesso.
P.S. Tutti e due gli hard disk sono tranquillamente accessibili da ubuntu

Allego file smb.in

Codice:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
    log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
    max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
    syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
    server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
;    passdb backend = tdbsam

    obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
    unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
    pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
    map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;    usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
    usershare allow guests = yes
    username map = /etc/samba/smbusers
    security = user
;    encrypt passwords = yes
;    guest ok = no
;    guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
;    guest ok = no
;    read only = yes
    create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[Barracuda]
    path = /media/me/Barracuda
    writeable = yes
    browseable = no
    guest ok = yes
    force user = me

[WD]
    path = /media/me/WD Red 4TB
    writeable = yes
    browseable = no
    guest ok = yes
    force user = me

[Torrent]
    path = /home/me/Documenti/Torrent
    writeable = yes
    browseable = no
    guest ok = yes
    force user = me
 

Allegati

  • 1.jpg
    1.jpg
    25.2 KB · Visualizzazioni: 58
  • 2.jpg
    2.jpg
    36.9 KB · Visualizzazioni: 61
  • 3.jpg
    3.jpg
    82.9 KB · Visualizzazioni: 59
  • 61dv+5vK8UL._SL1200_.jpg
    61dv+5vK8UL._SL1200_.jpg
    75.1 KB · Visualizzazioni: 52
Ultima modifica:

centoventicinque

Moderatore
Staff Forum
Utente Èlite
7,426
3,196
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
metti i browsable come yes
 

manuelp

Nuovo Utente
116
12
CPU
Ryzen 7 5700x
Dissipatore
Corsair H110 280mm
Scheda Madre
Asus x570 ROG Crosshair VIII Hero
HDD
Sandisk Extreme PRO 500gb M2 NVME
RAM
4x8Gb Crucial Ballistix RGB 3200Mhz cl.16
GPU
RTX 3060Ti Gaming X Trio
Audio
Schiit Hel + Beyerdynamic dt990 edition 32 ohm
Monitor
Pixio PX7 Prime 165Hz Freesync QHD
PSU
Antec HCG Gold 650W
Case
NZXT H440
Periferiche
CM Masterkeys SK650, ROG Gladius III
Net
FTTH 1000
OS
Win 11 Pro

Allegati

  • berg.jpg
    berg.jpg
    56.3 KB · Visualizzazioni: 66

centoventicinque

Moderatore
Staff Forum
Utente Èlite
7,426
3,196
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
i permessi sulle directory dove sono montati i dischi come sono ?
 

manuelp

Nuovo Utente
116
12
CPU
Ryzen 7 5700x
Dissipatore
Corsair H110 280mm
Scheda Madre
Asus x570 ROG Crosshair VIII Hero
HDD
Sandisk Extreme PRO 500gb M2 NVME
RAM
4x8Gb Crucial Ballistix RGB 3200Mhz cl.16
GPU
RTX 3060Ti Gaming X Trio
Audio
Schiit Hel + Beyerdynamic dt990 edition 32 ohm
Monitor
Pixio PX7 Prime 165Hz Freesync QHD
PSU
Antec HCG Gold 650W
Case
NZXT H440
Periferiche
CM Masterkeys SK650, ROG Gladius III
Net
FTTH 1000
OS
Win 11 Pro

Allegati

  • wd.jpg
    wd.jpg
    139.9 KB · Visualizzazioni: 62
  • barracuda.jpg
    barracuda.jpg
    85.5 KB · Visualizzazioni: 47

centoventicinque

Moderatore
Staff Forum
Utente Èlite
7,426
3,196
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
cambia permessi ai file contenuti, metti anyone
 

manuelp

Nuovo Utente
116
12
CPU
Ryzen 7 5700x
Dissipatore
Corsair H110 280mm
Scheda Madre
Asus x570 ROG Crosshair VIII Hero
HDD
Sandisk Extreme PRO 500gb M2 NVME
RAM
4x8Gb Crucial Ballistix RGB 3200Mhz cl.16
GPU
RTX 3060Ti Gaming X Trio
Audio
Schiit Hel + Beyerdynamic dt990 edition 32 ohm
Monitor
Pixio PX7 Prime 165Hz Freesync QHD
PSU
Antec HCG Gold 650W
Case
NZXT H440
Periferiche
CM Masterkeys SK650, ROG Gladius III
Net
FTTH 1000
OS
Win 11 Pro
Anche cambiando i permessi ai file contenuti non è cambiato nulla, ho scoperto una cosa però, usando un altro hard disk (500gb 2.5') il problema non si ripresenta più. è possibile che qualche settore danneggiato o altro non permetta una corretta condivisione seppur sia navigabile correttamente dalla macchina locale?
 

Allegati

  • disk.jpg
    disk.jpg
    89.1 KB · Visualizzazioni: 59

Entra

oppure Accedi utilizzando
Discord Ufficiale Entra ora!

Discussioni Simili