Vi posto i dati S.M.A.R.T. del mio HD, sapreste dirmi se è in buona salute o meno?
Codice:
daniele@Daniele-HP ~$ sudo smartctl --all /dev/sda
Codice:
[FONT=Ubuntu][COLOR=#28313f]smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.15.10-201.fc20.x86_64] (local build)[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]=== START OF INFORMATION SECTION ===[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Model Family: Hitachi/HGST Travelstar 5K750[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Device Model: Hitachi HTS547550A9E384[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Serial Number: J2150050KBHHRW[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]LU WWN Device Id: 5 000cca 640ef80ce[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Firmware Version: JE3OA50A[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]User Capacity: 500,107,862,016 bytes [500 GB][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Sector Sizes: 512 bytes logical, 4096 bytes physical[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Rotation Rate: 5400 rpm[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Form Factor: 2.5 inches[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Device is: In smartctl database [for details use: -P show][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]ATA Version is: ATA8-ACS T13/1699-D revision 6[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SATA Version is: SATA 2.6, 3.0 Gb/s[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Local Time is: Sat Sep 13 11:10:55 2014 CEST[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART support is: Available - device has SMART capability.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART support is: Enabled[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]=== START OF READ SMART DATA SECTION ===[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART overall-health self-assessment test result: PASSED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]General SMART Values:[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Offline data collection status: (0x00) Offline data collection activity[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] was never started.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Auto Offline Data Collection: Disabled.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Self-test execution status: ( 0) The previous self-test routine completed[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] without error or no self-test has ever [/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] been run.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Total time to complete Offline [/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]data collection: ( 45) seconds.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Offline data collection[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]capabilities: (0x51) SMART execute Offline immediate.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] No Auto Offline data collection support.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Suspend Offline collection upon new[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] command.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] No Offline surface scan supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Self-test supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] No Conveyance Self-test supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Selective Self-test supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART capabilities: (0x0003) Saves SMART data before entering[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] power-saving mode.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Supports SMART auto save timer.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Error logging capability: (0x01) Error logging supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] General Purpose Logging supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Short self-test routine [/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]recommended polling time: ( 2) minutes.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Extended self-test routine[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]recommended polling time: ( 135) minutes.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SCT capabilities: (0x003d) SCT Status supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SCT Error Recovery Control supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SCT Feature Control supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SCT Data Table supported.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART Attributes Data Structure revision number: 16[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Vendor Specific SMART Attributes with Thresholds:[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 1 Raw_Read_Error_Rate 0x002f 100 099 062 Pre-fail Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 3 Spin_Up_Time 0x0023 211 100 033 Pre-fail Always - 1[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 2260[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 7531[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1926[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 798900617216[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]188 Command_Timeout 0x0032 100 100 000 Old_age Always - 327681[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]190 Airflow_Temperature_Cel 0x0022 059 048 045 Old_age Always - 41 (Min/Max 38/44)[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 34111[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6684774[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]193 Load_Cycle_Count 0x0032 043 043 000 Old_age Always - 579299[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART Error Log Version: 1[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]ATA Error Count: 1[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] CR = Command Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] FR = Features Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SC = Sector Count Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SN = Sector Number Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] CL = Cylinder Low Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] CH = Cylinder High Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] DH = Device/Head Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] DC = Device Command Register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] ER = Error register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] ST = Status register [HEX][/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Powered_Up_Time is measured from power on, and printed as[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SS=sec, and sss=millisec. It "wraps" after 49.710 days.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Error 1 occurred at disk power-on lifetime: 6234 hours (259 days + 18 hours)[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] When the command that caused the error occurred, the device was active or idle.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] After command completion occurred, registers were:[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] ER ST SC SN CL CH DH[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] -- -- -- -- -- -- --[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 40 51 00 08 4e 46 0d Error: WP at LBA = 0x0d464e08 = 222711304[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] Commands leading to the command that caused the error were:[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] -- -- -- -- -- -- -- -- ---------------- --------------------[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 61 08 70 80 38 22 40 08 01:33:08.087 WRITE FPDMA QUEUED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 61 10 68 48 d5 79 40 08 01:33:08.078 WRITE FPDMA QUEUED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 61 08 60 a0 3d c1 40 08 01:33:08.070 WRITE FPDMA QUEUED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 61 08 58 c8 b4 06 40 08 01:33:08.061 WRITE FPDMA QUEUED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 61 08 50 a0 b4 06 40 08 01:33:08.051 WRITE FPDMA QUEUED[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART Self-test log structure revision number 1[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 1 Short offline Completed without error 00% 7531 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 2 Extended offline Aborted by host 90% 7531 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 3 Short offline Completed without error 00% 5590 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 4 Short offline Aborted by host 70% 5590 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 5 Short offline Completed without error 00% 2963 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]# 6 Short offline Completed without error 00% 671 -[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]
[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]SMART Selective self-test log data structure revision number 1[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 1 0 0 Not_testing[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 2 0 0 Not_testing[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 3 0 0 Not_testing[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 4 0 0 Not_testing[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] 5 0 0 Not_testing[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]Selective self-test flags (0x0):[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f] After scanning selected spans, do NOT read-scan remainder of disk.[/COLOR][/FONT]
[FONT=Ubuntu][COLOR=#28313f]If Selective self-test is pending on power-up, resume after 0 minute delay.[/COLOR][/FONT]