Windows non rileva HDD

Vegliantzz

Nuovo Utente
55
10
In quale slot M2 hai messo la tua memoria SSD?
When a device in SATA mode is installed on the M.2_2 socket, SATA6G_2 port cannot be used.
L'SSD è installato sul M.2_2 socket, ma nel SATA6G_2 è collegato il lettore dvd che è perfettamente funzionante inoltre ho provato anche con la porta 4 ma non funziona ugualmente
Post unito automaticamente:

Riesci a mandare una foto, poi scrivi anche quello che ha chiesto moffetta forse è quello il problema

Inviato dal mio SM-A600FN utilizzando Tapatalk
Post unito automaticamente:

Riesci a mandare una foto, poi scrivi anche quello che ha chiesto moffetta forse è quello il problema

Inviato dal mio SM-A600FN utilizzando Tapatalk
 

Allegati

  • IMG_20210628_214624.jpg
    IMG_20210628_214624.jpg
    1.2 MB · Visualizzazioni: 26

Matteo Basso

Utente Attivo
819
69
CPU
Intel i3 380m
Scheda Madre
Acer Aspire 5742G
HDD
HDD WDC WD5000BEVT-22A0RT0 500,1 GB
RAM
4GB ddr3 Samsung
GPU
NVIDIA GT 540M
Monitor
Asus VS197
Case
Acer Aspire 5742G
OS
Windows 7 e 10
Metti achi e vedi se va se non va metti quello che era messo prima

Inviato dal mio SM-A600FN utilizzando Tapatalk
 

Moffetta88

Moderatore
Staff Forum
Utente Èlite
20,400
12,850
CPU
i5-4690
Dissipatore
DEEPCOOL CAPTAIN 240EX
Scheda Madre
MSI Z97 U3 PLUS
HDD
KINGSTON SSD KC400 240GB
RAM
24GB BALLISTIX SPORT @2133MHz
GPU
STRIX GTX980 DC2OC
Audio
INTEGRATA
Monitor
AOC G2590VXQ
PSU
BEQUIET! System Power 7 500W
Case
DEEPCOOL MATREXX 55
Periferiche
NESSUNA
Net
EOLO 100
OS
UBUNTU/WINDOWS11
Eh beh certo, perchè hai installato window susando rst...
Devi seguire questi passaggi
Some systems will have the Windows operating system installed using RAID drivers including the Intel Rapid Storage Technology. SSD drives typically perform better using AHCI drivers. There is in fact a way to switch operation from either IDE / RAID to AHCI within Windows 10 without having to reinstall. Here are the steps:
  1. Click the Start Button and type cmd
  2. Right-click the result and select Run as administrator
  3. Type this command and press ENTER: bcdedit /set {current} safeboot minimal (ALT: bcdedit /set safeboot minimal)
  4. Restart the computer and enter BIOS Setup
  5. Change the SATA Operation mode to AHCI from either IDE or RAID
  6. Save changes and exit Setup and Windows will automatically boot to Safe Mode.
  7. Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
  8. Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot)
  9. Reboot once more and Windows will automatically start with AHCI drivers enabled.


Altrimenti cambi in AHCI e reinstalli da zero windows.
 

Matteo Basso

Utente Attivo
819
69
CPU
Intel i3 380m
Scheda Madre
Acer Aspire 5742G
HDD
HDD WDC WD5000BEVT-22A0RT0 500,1 GB
RAM
4GB ddr3 Samsung
GPU
NVIDIA GT 540M
Monitor
Asus VS197
Case
Acer Aspire 5742G
OS
Windows 7 e 10

Entra

oppure Accedi utilizzando
Discord Ufficiale Entra ora!

Discussioni Simili