Problemi di compatibilità tra masterizzatore SATA e lettore IDE?

groucho80

Utente Attivo
Salve a tutti!

Sul mio pc fisso (Windows 7 64bit, scheda madre Asrock M3A790GMH/128M con processore Athlon II X2 245, 6 gb DDR3 1333 e lettore e masterizzatore IDE) ho provato a sostituire il vecchio masterizzatore DVD IDE con uno SATA, ottenendo però sempre dei problemi...
Ho provato prima con un Samsung SH-224, che però mi ha reso inservibili vari DVD e CD riscrivibili, restituendo spesso anche un errore di "calibrazione dell'alimentazione"; ho provato a cambiare l'unità, pensando che fosse difettosa, ed ho preso un LG GH24NS95 che però continua a funzionare in maniera strana, a volte scrivendo i dischi ed altre scrivendoli solo apparentemente, arrivando a bloccarsi nella verifica dei dati (con Nero)... In questi casi sul CD/DVD non risulta scritto nulla e comunque fatica ad aprirsi il contenuto.
Le ho pensate e provate più o meno tutte, dall'incompatibilità tra lettore IDE e masterizzatore SATA ai problemi di alimentazione, a qualche parametro sbagliato sul bios... Tra l'altro, dal momento che anche il vecchio lettore IDE sembra comportarsi in maniera strana (a volte legge, altre no) mi sembra che l'ipotesi della non compatibilità o quella dei parametri siano le più verosimili! :grat:

Qualcuno sai aiutarmi/suggerirmi qualche tentativo? E' possibile che il lettore IDE e il masterizzatore SATA vadano in conflitto creando (anche se non sempre) dei problemi di compatibilità? Devo cambiare qualcosa sul bios (per ora ho solo provato a ripristinare il default)?

Grazie!!! :ciaociao:

- - - Updated - - -

Aggiungo che il lettore IDE ha il jumper settato su master

- - - Updated - - -

Nessuno? :cry:
Se qualcuno sa trarne qualche informazione, questo è uno dei log d'errore di Nero:



9X03-016C-MXEX-4536-T0L7-2W2T-****-****
1K00-6035-0593-5A40-37K0-****-****
KC00-10C4-1890-2509-KAEC-****-****
1E31-9ME5-988X-447E-9A21-****-****
1EE0-4X07-194A-0K04-9E21-****-****

Windows 7 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GH24NSB0>Version: LN00 - HA 1 TA 0 - 10.0.10.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 512kB
Bus Type : via Inquiry data
CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0100 - HA 1 TA 1 - 10.0.10.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GH24NSB0 E: CdRom0
HL-DT-ST DVD-ROM GDR8161B F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2013
CD-ROM (ISO)
14:33:51 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:33:51 #2 Text 0 File Isodoc.cpp, Line 6956
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:33:51 #3 Text 0 File Burncd.cpp, Line 3238
HL-DT-ST DVDRAM GH24NSB0
Protezione buffer underrun attivato

14:33:51 #4 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

14:33:51 #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media

14:33:51 #6 Text 0 File DlgWaitCD.cpp, Line 295
[E: DVDRAM GH24NSB0 ] Medium type in the drive: CD-RW High Speed
Lowest/Highest CLV write speed: 4x/10x
Recorder min/max supported write speed: 10x/10x

14:33:51 #7 Text 0 File DlgWaitCD.cpp, Line 314
[E: DVDRAM GH24NSB0 ] Last possible write address on media: 359845
Last address to be written: 248719

14:33:51 #8 Text 0 File DlgWaitCD.cpp, Line 326
[E: DVDRAM GH24NSB0 ] Write in overburning mode: NO (enabled: CD)

14:33:51 #9 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: HL-DT-ST DVDRAM GH24NSB0;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 80 80 (invalid)

14:33:51 #10 Text 0 File DlgWaitCD.cpp, Line 499
[E: DVDRAM GH24NSB0 ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

14:33:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 248720 (248720) = #248720/55:16.20
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 248720 blocks [E: HL-DT-ST DVDRAM GH24NSB0]
--------------------------------------------------------------

14:33:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [E: HL-DT-ST DVDRAM GH24NSB0] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 509685760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 248720 | 0 | 0x00
248720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: CD-RW

14:33:52 #13 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:33:52 #14 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14:33:52 #15 PHASE 24 File dlgbrnst.cpp, Line 1827
Caching of files started

14:33:52 #16 Text 0 File Burncd.cpp, Line 4400
Cache writing successful.

14:33:52 #17 PHASE 25 File dlgbrnst.cpp, Line 1827
Caching of files completed

14:33:52 #18 PHASE 32 File dlgbrnst.cpp, Line 1827
Simulation started at 10x (1.500 KB/s)

14:33:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:33:52 #20 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off

14:33:52 #21 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON

14:33:52 #22 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 37 12 14

14:33:52 #23 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:39:40 #24 Text 0 File WriterStatus.cpp, Line 244
<E: HL-DT-ST DVDRAM GH24NSB0> start writing Lead-Out at LBA 248720 (3CB90h), length 0 blocks

14:39:56 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:39:56 #26 PHASE 33 File dlgbrnst.cpp, Line 1827
Simulation completed successfully at 10x (1.500 KB/s)

14:39:56 #27 PHASE 36 File dlgbrnst.cpp, Line 1827
Burn process started at 10x (1.500 KB/s)

14:39:56 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:39:56 #29 SPTI -1046 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x0d97e7c0: Len x20

14:39:56 #30 CDR -1046 File ThreadedTransferInterface.cpp, Line 1736
Illegal disc
E: HL-DT-ST DVDRAM GH24NSB0

14:39:56 #31 TRANSFER -35 File ThreadedTransfer.cpp, Line 1222
Invalid track info

14:39:56 #32 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:39:56 #33 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:39:56 #34 PHASE 38 File dlgbrnst.cpp, Line 1827
Burn process failed at 10x (1.500 KB/s)

14:39:56 #35 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:39:56 #36 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed

14:39:56 #37 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
 
Ultima modifica:

TonyPg22

Utente Attivo
1,087
290
Hardware Utente
Sistema Operativo
Windows 8.1
Mi sa che vanno in conflitto lettore ide e il masterizzatore sata, e questo causa i problemi che hai...
Purtroppo non mi viene in mente nulla per risolvere :(
 

Kelion

Quid est veritas?
Utente Èlite
17,056
4,933
Hardware Utente
Salve a tutti!

Sul mio pc fisso (Windows 7 64bit, scheda madre Asrock M3A790GMH/128M con processore Athlon II X2 245, 6 gb DDR3 1333 e lettore e masterizzatore IDE) ho provato a sostituire il vecchio masterizzatore DVD IDE con uno SATA, ottenendo però sempre dei problemi...
Ho provato prima con un Samsung SH-224, che però mi ha reso inservibili vari DVD e CD riscrivibili, restituendo spesso anche un errore di "calibrazione dell'alimentazione"; ho provato a cambiare l'unità, pensando che fosse difettosa, ed ho preso un LG GH24NS95 che però continua a funzionare in maniera strana, a volte scrivendo i dischi ed altre scrivendoli solo apparentemente, arrivando a bloccarsi nella verifica dei dati (con Nero)... In questi casi sul CD/DVD non risulta scritto nulla e comunque fatica ad aprirsi il contenuto.
Le ho pensate e provate più o meno tutte, dall'incompatibilità tra lettore IDE e masterizzatore SATA ai problemi di alimentazione, a qualche parametro sbagliato sul bios... Tra l'altro, dal momento che anche il vecchio lettore IDE sembra comportarsi in maniera strana (a volte legge, altre no) mi sembra che l'ipotesi della non compatibilità o quella dei parametri siano le più verosimili! :grat:

Qualcuno sai aiutarmi/suggerirmi qualche tentativo? E' possibile che il lettore IDE e il masterizzatore SATA vadano in conflitto creando (anche se non sempre) dei problemi di compatibilità? Devo cambiare qualcosa sul bios (per ora ho solo provato a ripristinare il default)?

Grazie!!! :ciaociao:

- - - Updated - - -

Aggiungo che il lettore IDE ha il jumper settato su master

- - - Updated - - -

Nessuno? :cry:
Se qualcuno sa trarne qualche informazione, questo è uno dei log d'errore di Nero:



9X03-016C-MXEX-4536-T0L7-2W2T-****-****
1K00-6035-0593-5A40-37K0-****-****
KC00-10C4-1890-2509-KAEC-****-****
1E31-9ME5-988X-447E-9A21-****-****
1EE0-4X07-194A-0K04-9E21-****-****

Windows 7 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100
(Nero Express)
Recorder: Version: LN00 - HA 1 TA 0 - 10.0.10.100
Adapter driver: HA 1
Drive buffer : 512kB
Bus Type : via Inquiry data
CD-ROM: Version: 0100 - HA 1 TA 1 - 10.0.10.100
Adapter driver: HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GH24NSB0 E: CdRom0
HL-DT-ST DVD-ROM GDR8161B F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2013
CD-ROM (ISO)
14:33:51 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:33:51 #2 Text 0 File Isodoc.cpp, Line 6956
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:33:51 #3 Text 0 File Burncd.cpp, Line 3238
HL-DT-ST DVDRAM GH24NSB0
Protezione buffer underrun attivato

14:33:51 #4 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

14:33:51 #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media

14:33:51 #6 Text 0 File DlgWaitCD.cpp, Line 295
[E: DVDRAM GH24NSB0 ] Medium type in the drive: CD-RW High Speed
Lowest/Highest CLV write speed: 4x/10x
Recorder min/max supported write speed: 10x/10x

14:33:51 #7 Text 0 File DlgWaitCD.cpp, Line 314
[E: DVDRAM GH24NSB0 ] Last possible write address on media: 359845
Last address to be written: 248719

14:33:51 #8 Text 0 File DlgWaitCD.cpp, Line 326
[E: DVDRAM GH24NSB0 ] Write in overburning mode: NO (enabled: CD)

14:33:51 #9 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: HL-DT-ST DVDRAM GH24NSB0;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 80 80 (invalid)

14:33:51 #10 Text 0 File DlgWaitCD.cpp, Line 499
[E: DVDRAM GH24NSB0 ] >>> Protocol of DlgWaitCD activities: =========================================

14:33:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 248720 (248720) = #248720/55:16.20
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 248720 blocks [E: HL-DT-ST DVDRAM GH24NSB0]
--------------------------------------------------------------

14:33:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [E: HL-DT-ST DVDRAM GH24NSB0] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 509685760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 248720 | 0 | 0x00
248720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: CD-RW

14:33:52 #13 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:33:52 #14 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (
14:33:52 #15 PHASE 24 File dlgbrnst.cpp, Line 1827
Caching of files started

14:33:52 #16 Text 0 File Burncd.cpp, Line 4400
Cache writing successful.

14:33:52 #17 PHASE 25 File dlgbrnst.cpp, Line 1827
Caching of files completed

14:33:52 #18 PHASE 32 File dlgbrnst.cpp, Line 1827
Simulation started at 10x (1.500 KB/s)

14:33:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:33:52 #20 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off

14:33:52 #21 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON

14:33:52 #22 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 37 12 14

14:33:52 #23 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:39:40 #24 Text 0 File WriterStatus.cpp, Line 244
start writing Lead-Out at LBA 248720 (3CB90h), length 0 blocks

14:39:56 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:39:56 #26 PHASE 33 File dlgbrnst.cpp, Line 1827
Simulation completed successfully at 10x (1.500 KB/s)

14:39:56 #27 PHASE 36 File dlgbrnst.cpp, Line 1827
Burn process started at 10x (1.500 KB/s)

14:39:56 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:39:56 #29 SPTI -1046 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x0d97e7c0: Len x20

14:39:56 #30 CDR -1046 File ThreadedTransferInterface.cpp, Line 1736
Illegal disc
E: HL-DT-ST DVDRAM GH24NSB0

14:39:56 #31 TRANSFER -35 File ThreadedTransfer.cpp, Line 1222
Invalid track info

14:39:56 #32 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:39:56 #33 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:39:56 #34 PHASE 38 File dlgbrnst.cpp, Line 1827
Burn process failed at 10x (1.500 KB/s)

14:39:56 #35 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:39:56 #36 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed

14:39:56 #37 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Nel BIOS in gestione disco che modalità hai settata? Controlla le voci presenti

Inviato da ASUS_Z00LD tramite App ufficiale di Tom\'s Hardware Italia Forum
 

Entra

oppure Accedi utilizzando