Masterizzatore LG GSA-4163B

Pubblicità
G

Grond

Utente Attivo
Messaggi
16
Reazioni
0
Punteggio
25
Per prima cosa ciao a tutti.

Ho un problema con io mio PC in ufficio: si tratta di un PC di marca HP (un Pavilion a405.it) al quale ho sostituito il masterizzatore Cd montato di default con un masterizzatore DVD LG GSA-4163B.
Ho anche aggiunto al PC 512 Mb di RAM ma queste non mi hanno mai creato problemi.

Presto detto, il masterizzatore in questioen mi brucia tutti i DVD, sia normali che dual layer, ho provato con 3 marche diverse ma non c'è nulla da fare, ho persino sostituito il masterizzatore con un altro identico, ma ancora nulla. Il firmware è stato aggiornato all'ultima versione dal sito Canadese della LG.

Il log di Nero segue:

...
...
1A23-0609-4030-2380-1981-2272

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 2 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DPS7 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 2

=== Scsi-Device-Map ===
CdRomPeripheral : JLMS XJ-HD166S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
HL-DT-ST DVDRAM GSA-4163B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 95MB (97884kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.9.2005
Compilation ISO
9.12.41 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9.12.41 #2 Text 0 File Reader.cpp, Line 127
Reader running

9.12.41 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

9.12.41 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9.12.41 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

9.12.41 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1171247 (260:16.47, 2287MB)

9.12.41 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

9.12.42 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193

9.12.42 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9.12.42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1171248 (1171248) = #1171248/260:16.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1171248 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

9.12.45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2398715904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1171248 | lead-out | 1 | 0x41 | 0x00

9.12.45 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9.12.45 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

9.12.45 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9.12.46 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

9.12.46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9.13.58 #17 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1171248 (11DF30h), lenght 0 blocks

9.13.58 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9.13.59 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 23,9x (33.036 KB/s)

9.13.59 #20 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5.540 KB/s)

9.13.59 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9.13.59 #22 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession

9.13.59 #23 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

9.13.59 #24 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

9.13.59 #25 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9.21.19 #26 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1171248 (11DF30h), lenght 0 blocks

9.21.19 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9.21.19 #28 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1171247

9.21.21 #29 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

9.21.23 #30 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5.540 KB/s)

9.21.24 #31 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)

9.21.24 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9.21.24 #33 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession

9.21.24 #34 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

9.21.24 #35 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

9.21.24 #36 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP),
 
segue

Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9.21.26 #37 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03BD5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x00 0x0C 0x0C 0x00

9.21.26 #38 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x04180000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0C 0x21 0x02

9.21.26 #39 CDR -1135 File Writer.cpp, Line 311
Write error
HL-DT-ST DVDRAM GSA-4163B\H2 T1

9.21.26 #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9.21.26 #41 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9.21.26 #42 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 31

9.21.28 #43 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

9.21.28 #44 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12.02.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Avete suggerimenti? Vi servono altre info?
 
io continuo a riperete:non fidatevi di LG..
excalibur,a me non sembra un problema software..se fosse così non dovrebbe nenche partire la scrittura.. :nod:
a che punto de li brucia?inizio,metà,fine,casuale..
 
in questi casi consiglio sempre di verificare se nelle proprietà del controller ide al quale è attaccato il mastrizzatore ci si il DMA attivato. Inoltre, si può provare anche a cambiare cavo e metterne uno a 80 poli se non lo si ha già.

ciao
 
Andytpks ha detto:
pure io mi sono trovato male con LG e mi trovo tuttora male. Si vedrà!
Clicca per espandere...
Beh, e' facile dare la colpa alla marca... peccato che con LG non abbia mai incontrato veri problemi.
Certo e' piu' difficile andare a cercare qualche sovrapposizione/conflitto dei driver ASPI.
 
[Excalibur] ha detto:
Prova a disinstallare TUTTI i programmi di masterizzazione che hai.
Poi installa Alcohol120% e vedi se ti fa lo stesso scherzo.
Clicca per espandere...
Ho provato, ma mi sembra di capire che questo programma estrai le immagini di un disco o effettua la copia diretta ma non ti permette di fare backup di file che hai su disco rigido (mevo leggere meglio il manuale forse).
Intanto provo con gli atri!
 
Mr_K ha detto:
io continuo a riperete:non fidatevi di LG..
excalibur,a me non sembra un problema software..se fosse così non dovrebbe nenche partire la scrittura.. :nod:
a che punto de li brucia?inizio,metà,fine,casuale..
Clicca per espandere...
Effettua una simulazione perfetta ma brucia il disco all'inizio.
Ho provato con dei 4.7 e dei 9.4 finora tutti bruciati...
 
Io ho il tuo stesso masterizzatore... cmq ti consiglio di aprirlo e fare una pulizia della lente (a scapito della garanzia) :nod:
 
e io ho sentito troppe volte gente che parla per sentito dire.
tra me mio fratello la sua ragazza e il fratello di lei abbiamo 5 masterizzatori lg e un lite-on.

nessuno di questi ha mai dato problemi di nessun tipo.
mi spieghi perchè dovrei dire che lg non va bene?mai bruciato un cd o dvd.
poi continua pure a dire che lg fa schifo.io ce li ho e me li tengo.
 
Pubblicità
Pubblicità
Indietro
Top