Ciao a tutti ,ritorno a rompervi le scatole, sul come impostare un Ip statico sul mio Raspeberry Pi 4 B .Stavolta però stavolta dobrei impostarlo tramite un router wi fi Belkin .
Vi lascio qui sotto tutti i vari parametri della mia connessione, e rigrazio chi mi potrà aiutare.
@raspberrypi:~ $ ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether dc:a6:32:56:24:39 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 9 bytes 524 (524.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9 bytes 524 (524.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.3 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::dea6:32ff:fe56:243a prefixlen 64 scopeid 0x20<link>
ether dc:a6:32:56:24:3a txqueuelen 1000 (Ethernet)
RX packets 1189 bytes 1128192 (1.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1063 bytes 171187 (167.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Questi sono invece i dati del mio router Belkin :
ernet Settings
00:11:50:4E:A2:BF
Dynamic
255.255.255.0
84.238.117.209
84.238.117.1
84.238.0.130
Vi lascio qui sotto tutti i vari parametri della mia connessione, e rigrazio chi mi potrà aiutare.
@raspberrypi:~ $ ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether dc:a6:32:56:24:39 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 9 bytes 524 (524.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9 bytes 524 (524.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.3 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::dea6:32ff:fe56:243a prefixlen 64 scopeid 0x20<link>
ether dc:a6:32:56:24:3a txqueuelen 1000 (Ethernet)
RX packets 1189 bytes 1128192 (1.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1063 bytes 171187 (167.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Questi sono invece i dati del mio router Belkin :
ernet Settings
00:11:50:4E:A2:BF
Dynamic
255.255.255.0
84.238.117.209
84.238.117.1
84.238.0.130
LAN Settings | |||
| 00:11:50:4E:A2:BF / 00:11:50:4E:A2:C0 | ||
192.168.2.1 | |||
255.255.255.0 | |||
Enabled |