- 6
- 0
- CPU
- Intel Pentium Dual Core 1.8GHz
- Scheda Madre
- Acer F672CR
- HDD
- 150GB WD SATA+80GB Maxtor IDE
- RAM
- DDR2 2GB
- GPU
- Invidia GeForce GT 520 Asus
- Audio
- Realteck Sis HDAC ALC1200
- Monitor
- Philips 190SW
- PSU
- 100W
- Case
- Di serie E2160
- OS
- Windows XP SP3
Salve a tutti, ho un grande problema con la GPU integrata.
Ho acquistato una scheda madre ASRock z170a-x1/3.1 (alla quale ho aggiornato il bios all'ultima versione) ed un processore Intel i5 6600k, assemblato il tutto ma non mi da nessun segnale video.
La scheda madre presenta una porta DVI-D dual link per ciò ho comprrto un (poi un altro) adattatore DVI-D dual link to VGA ma il monitor non rileva nessun segnale.
Ho aggiunto una GeForce GT 520 provvisoria la quale mi da il segnale video (sto usando quella attualmente).
L'ASRock mi ha risposto all'email dicendo di abblitare il multi monitor, installare i driver e provare. Abilitando il multi monitor il pc finalmente riconosce l'integrata ma non da segnale su essa, solo sulla nVidia.
Qualcuno ha avuto lo stesso problema? Oppure sa dirmi dove sbaglio? Ringrazzio l'intera comunità in anticipo
Ho acquistato una scheda madre ASRock z170a-x1/3.1 (alla quale ho aggiornato il bios all'ultima versione) ed un processore Intel i5 6600k, assemblato il tutto ma non mi da nessun segnale video.
La scheda madre presenta una porta DVI-D dual link per ciò ho comprrto un (poi un altro) adattatore DVI-D dual link to VGA ma il monitor non rileva nessun segnale.
Ho aggiunto una GeForce GT 520 provvisoria la quale mi da il segnale video (sto usando quella attualmente).
L'ASRock mi ha risposto all'email dicendo di abblitare il multi monitor, installare i driver e provare. Abilitando il multi monitor il pc finalmente riconosce l'integrata ma non da segnale su essa, solo sulla nVidia.
1. Please reboot the system then press[Delete] to enter the BIOS setup.
2. In Advanced>Chipset Configuration, please set the "IGPU Multi-Monitor" to "Enable".
3. Boot the system into the OS.
4. Please make sure onboard graphic and VGA driver have been install properly.
After setting, the system can display from both VGA and motherboard at the same time.
2. In Advanced>Chipset Configuration, please set the "IGPU Multi-Monitor" to "Enable".
3. Boot the system into the OS.
4. Please make sure onboard graphic and VGA driver have been install properly.
After setting, the system can display from both VGA and motherboard at the same time.
Qualcuno ha avuto lo stesso problema? Oppure sa dirmi dove sbaglio? Ringrazzio l'intera comunità in anticipo