:)
prima cosa un saluto a tutto il forum,sono nuova
ciaoooo
________________________________
ho un imedia packard bell con 1 gb di ram,in dual channel(2 banchi da 512 sui banchi 1 e 3,i banchi 2 e 4 vuoti)
e' possibile montare al posto degli attuali 2 banchi da 1 gb,x un totale di 2 gb?
questa la mia scheda madre:
Sunshine (GA-8I915PM Ver 1.1)
Specifications
Form Factor
* µATX 24.4 cm x 24.4 cm Form Factor
CPU Support
* Socket LGA775
* Support Intel® Pentium® Hyper - Threading technology with FMB Performance 2005 support
* Support for an Intel® Pentium® 4 processor in a LGA775 socket with a 800 MHz system bus, 2.8Ghz to 3.8 GHz or higher.
* Support for an Intel® Celeron® processor in a LGA775 socket with a 533 MHz system bus, 2.8 GHz or higher.
System Memory
* Four 184-pin DDR SDRAM DIMM sockets.
* Serial Presence Detect
* Support for single-sided or double-sided DIMMs (DDR 333 / DDR400)
* Support for up to 4 GB system memory
* Non-ECC RAM (ECC memory will run in non-ECC mode)
* Single and dual channel mode operation:
o Single channel mode with single DIMM, non-symmetrical population or non-identical DIMMs
o Dual channel mode with 2 or 4 identical DIMMs, populated symmetrically
Core Logic (Chipset)
* The Intel 915P chipset
I/O controller:
* ITE IT8712F-A
Fire Wire controller
* The Texas Instrument (TSB43AB23)
Audio Chipset
* Intel® High Definition Audio subsystem using the Realtek ALC880 audio codec.
Ethernet Controller
* Realtek RTL8100C PCI/Mini-PCI Single-Chip Fast Ethernet Controller
* Power Management
* 10 Mbps, 10 Base-T and 100 Mbps 100 Base-TX support
volevo sapere la cosa e' semplice,ovvero smonto i 2 banchi da 512,monto quelli da 1 gb..riavvio ed il gioco e' fatto..o possono esserci problemi?
ora i 2 banchi sono della nanja,pc3200 400 mhz DDR
basta prendere 2 banchi da 1gb con le stesse caratteristiche?(la marca puo' anche cambiare vero?)
ho sentito parlare di verificare i timing o qualcosa del genere..
il programmino cpu z mi dice questo sulla memoria del mio pc attuale:
http://img371.imageshack.us/img371/8945/ram1vn6.jpg
http://img134.imageshack.us/img134/3735/ram2iw9.jpg
spero si vedano le immagini del mio schemo..
spero nei vostri aiuti per risolvere il problema
ciao ciao
Clara
:ok:
ciao
prima cosa un saluto a tutto il forum,sono nuova
ciaoooo
________________________________
ho un imedia packard bell con 1 gb di ram,in dual channel(2 banchi da 512 sui banchi 1 e 3,i banchi 2 e 4 vuoti)
e' possibile montare al posto degli attuali 2 banchi da 1 gb,x un totale di 2 gb?
questa la mia scheda madre:
Sunshine (GA-8I915PM Ver 1.1)
Specifications
Form Factor
* µATX 24.4 cm x 24.4 cm Form Factor
CPU Support
* Socket LGA775
* Support Intel® Pentium® Hyper - Threading technology with FMB Performance 2005 support
* Support for an Intel® Pentium® 4 processor in a LGA775 socket with a 800 MHz system bus, 2.8Ghz to 3.8 GHz or higher.
* Support for an Intel® Celeron® processor in a LGA775 socket with a 533 MHz system bus, 2.8 GHz or higher.
System Memory
* Four 184-pin DDR SDRAM DIMM sockets.
* Serial Presence Detect
* Support for single-sided or double-sided DIMMs (DDR 333 / DDR400)
* Support for up to 4 GB system memory
* Non-ECC RAM (ECC memory will run in non-ECC mode)
* Single and dual channel mode operation:
o Single channel mode with single DIMM, non-symmetrical population or non-identical DIMMs
o Dual channel mode with 2 or 4 identical DIMMs, populated symmetrically
Core Logic (Chipset)
* The Intel 915P chipset
I/O controller:
* ITE IT8712F-A
Fire Wire controller
* The Texas Instrument (TSB43AB23)
Audio Chipset
* Intel® High Definition Audio subsystem using the Realtek ALC880 audio codec.
Ethernet Controller
* Realtek RTL8100C PCI/Mini-PCI Single-Chip Fast Ethernet Controller
* Power Management
* 10 Mbps, 10 Base-T and 100 Mbps 100 Base-TX support
volevo sapere la cosa e' semplice,ovvero smonto i 2 banchi da 512,monto quelli da 1 gb..riavvio ed il gioco e' fatto..o possono esserci problemi?
ora i 2 banchi sono della nanja,pc3200 400 mhz DDR
basta prendere 2 banchi da 1gb con le stesse caratteristiche?(la marca puo' anche cambiare vero?)
ho sentito parlare di verificare i timing o qualcosa del genere..
il programmino cpu z mi dice questo sulla memoria del mio pc attuale:
http://img371.imageshack.us/img371/8945/ram1vn6.jpg
http://img134.imageshack.us/img134/3735/ram2iw9.jpg
spero si vedano le immagini del mio schemo..
spero nei vostri aiuti per risolvere il problema
ciao ciao
Clara
:ok:
ciao